Tedd Ho-Jeong An ef4e5e4a75 Bluetooth: Add support for Intel Bluetooth device [8087:0a2a] ...

This patch adds support for new Intel Bluetooth device.

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0a2a Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

2013-12-04 11:09:04 -02:00

..

ath3k.c

Bluetooth: ath3k: Add support for a new AR3012 device

2013-12-04 11:09:04 -02:00

bcm203x.c

…

bfusb.c

Bluetooth: Declare bfusb_table[] as const

2013-10-11 17:05:20 +02:00

bluecard_cs.c

Bluetooth: Remove pointless parameter check in bluecard_hci_send_frame()

2013-10-11 16:57:15 +02:00

bpa10x.c

Bluetooth: Declare bpa10x_table[] as const

2013-10-11 17:05:22 +02:00

bt3c_cs.c

Bluetooth: Remove pointless parameter check in bt3c_hci_send_frame()

2013-10-11 16:57:27 +02:00

btmrvl_debugfs.c

Bluetooth: replace strict_strtol() with kstrtol()

2013-07-25 14:15:25 +01:00

btmrvl_drv.h

Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy

2013-12-04 11:09:03 -02:00

btmrvl_main.c

Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy

2013-12-04 11:09:03 -02:00

btmrvl_sdio.c

Bluetooth: btmrvl: use cal-data from device-tree instead of conf file

2013-12-04 11:09:03 -02:00

btmrvl_sdio.h

Bluetooth: btmrvl: use cal-data from device-tree instead of conf file

2013-12-04 11:09:03 -02:00

btsdio.c

Bluetooth: Add hdev parameter to hdev->send driver callback

2013-10-11 15:28:03 +02:00

btuart_cs.c

Bluetooth: Remove pointless parameter check in btuart_hci_send_frame()

2013-10-11 17:00:02 +02:00

btusb.c

Bluetooth: Add support for Intel Bluetooth device [8087:0a2a]

2013-12-04 11:09:04 -02:00

btwilink.c

Bluetooth: Add hdev parameter to hdev->send driver callback

2013-10-11 15:28:03 +02:00

dtl1_cs.c

Bluetooth: Remove pointless parameter check in dtl1_hci_send_frame()

2013-10-11 17:00:08 +02:00

hci_ath.c

…

hci_bcsp.c

Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback

2013-10-11 09:45:34 +02:00

hci_h4.c

Bluetooth: Remove unused h4_check_data_len() function

2013-10-11 07:51:09 +02:00

hci_h5.c

Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback

2013-10-11 09:45:34 +02:00

hci_ldisc.c

Bluetooth: Remove pointless parameter check in hci_uart_send_frame()

2013-10-11 17:00:24 +02:00

hci_ll.c

Bluetooth: Add hdev parameter to hdev->send driver callback

2013-10-11 15:28:03 +02:00

hci_uart.h

…

hci_vhci.c

Bluetooth: Remove pointless parameter check in vhci_send_frame()

2013-10-11 17:00:38 +02:00

Kconfig

Bluetooth: btmrvl: support Marvell Bluetooth device SD8897

2013-06-12 10:20:54 -04:00

Makefile

Bluetooth: Enable -D__CHECK_ENDIAN__ for sparse by default

2013-10-02 09:10:05 +03:00