Roger Quadros 7d5929c1f3 mtd: nand: omap: Revert to using software ECC by default ... For v3.12 and prior, 1-bit Hamming code ECC via software was the default choice. Commit c66d039197 in v3.13 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.12 and prior to be unusable in v3.13 and later. So revert back to using software ECC by default if an ECC scheme is not explicitely specified. This defect can be observed on the following boards during legacy boot -omap3beagle -omap3touchbook -overo -am3517crane -devkit8000 -ldp -3430sdp Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>		2014-08-25 16:15:32 -07:00
..
ad5449.h
ad5755.h
ad7266.h
ad7291.h	staging:iio:ad7291: Move out of staging	2014-07-08 21:17:30 +01:00
ad7298.h
ad7303.h
ad7791.h
ad7793.h
ad7887.h
adau17x1.h	ASoC: Add ADAU1381/ADAU1781 audio CODEC support	2014-05-27 20:54:51 +01:00
adau1977.h	ASoC: Add ADAU1977 CODEC driver	2014-02-19 13:36:15 +09:00
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c24xx_simtec.h	ASoC: s3c24xx: Remove invalid file reference	2014-02-25 21:29:31 +09:00
asoc-s3c.h	ASoC: samsung: remove s5pc100 related codes	2014-07-14 19:05:00 +01:00
asoc-ti-mcbsp.h	ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h	2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h	ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion	2014-01-07 15:36:09 +00:00
at24.h	misc: (at24) move header to linux/platform_data/	2013-09-30 06:02:34 +02:00
at91_adc.h	iio: adc: at91_adc: Add support for touchscreens without TSMR	2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h	ata: pata_samsung_cf: removes s5pc100 related ata codes	2014-06-30 10:48:08 -04:00
atmel.h	TTY/Serial driver patches for 3.16-rc1	2014-06-03 09:01:02 -07:00
bd6107.h
brcmfmac-sdio.h
bt-nokia-h4p.h	staging/bluetooth: Add hci_h4p driver	2014-02-07 10:13:53 -08:00
camera-mx2.h
camera-mx3.h
camera-pxa.h
camera-rcar.h
clk-integrator.h	ARM: integrator: switch to fetch clocks from device tree	2014-02-13 11:20:42 +01:00
clk-lpss.h
clk-realview.h
clk-u300.h
clk-ux500.h	clk: ux500: Copy u8500_clk_init() ready for DT enablement	2013-09-26 11:05:26 +02:00
coda.h
crypto-atmel.h
crypto-ux500.h
cyttsp4.h
davinci_asp.h	ASoC: davinci-mcasp: Rename platform data struct	2014-02-03 18:26:59 +00:00
db8500_thermal.h
dma-atmel.h
dma-coh901318.h
dma-ep93xx.h
dma-imx-sdma.h	dma: imx-sdma: Add sdma firmware version 2 support	2013-12-16 09:18:47 +05:30
dma-imx.h	Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma	2014-08-11 07:14:01 -07:00
dma-mmp_tdma.h	dma: Cleanup dma-mmp_tdma.h header	2014-01-13 13:30:30 +05:30
dma-mv_xor.h	dma: mv_xor: Cleanup in dma-mv_xor.h header	2014-01-13 13:30:31 +05:30
dma-rcar-audmapp.h	shdma: add R-Car Audio DMAC peri peri driver	2014-03-29 19:38:09 +05:30
dma-rcar-hpbdma.h
dma-s3c24xx.h	ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442	2013-10-21 05:32:48 +09:00
dma-ste-dma40.h
dmtimer-omap.h
dwc3-exynos.h
dwc3-omap.h
edma.h	ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue	2014-07-28 17:03:13 +05:30
efm32-spi.h
efm32-uart.h
ehci-sh.h
elm.h	mtd: nand: omap: add support for BCH16_ECC - ELM driver updates	2014-05-20 17:52:14 -07:00
emif_plat.h
eth-netx.h	net: Cleanup in eth-netx.h	2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h
gpio_backlight.h
gpio-davinci.h	gpio: remove obsolete tnetv107x driver	2014-03-05 10:44:44 +08:00
gpio-em.h
gpio-lpc32xx.h	ARM: lpc32xx: move custom GPIO header	2013-12-03 11:26:06 +01:00
gpio-omap.h
gpio-rcar.h
gpio-ts5500.h
hwmon-s3c.h	hwmon: (s3c) Trivial cleanup in hwmon-s3c.h	2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h
i2c-davinci.h
i2c-imx.h
i2c-nuc900.h
i2c-s3c2410.h	i2c: s3c2410: Trivial cleanup in header file	2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h	watchdog: add Intel MID watchdog driver support	2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
iommu-omap.h	iommu/omap: Remove platform data da_start and da_end fields	2014-07-29 12:39:56 +02:00
ipmmu-vmsa.h	iommu: Add driver for Renesas VMSA-compatible IPMMU	2014-05-26 11:18:21 +02:00
irda-pxaficp.h
irq-renesas-intc-irqpin.h
irq-renesas-irqc.h
keyboard-pxa930_rotary.h
keyboard-spear.h
keypad-ep93xx.h	Input: keypad-ep93xx - cleanup header file	2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h	Input: keypad-omap - cleanup header file	2013-12-27 17:20:22 -08:00
keypad-pxa27x.h
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h	leds: lp55xx: handle enable pin in driver	2013-10-25 10:13:25 -07:00
leds-omap.h
leds-pca963x.h
leds-s3c24xx.h	leds: leds-s3c24xx: Trivial cleanup in header file	2014-02-27 09:57:11 -08:00
lm3630a_bl.h	backlight: lm3630: apply chip revision	2013-11-13 12:09:15 +09:00
lm3639_bl.h
lp855x.h	backlight: lp855x_bl: support new LP8555 device	2013-11-13 12:09:14 +09:00
lp8727.h
lp8755.h
lv5207lp.h
macb.h
mailbox-omap.h
max197.h	hwmon: (max197) add include guard	2014-01-14 21:36:53 -08:00
max3421-hcd.h	usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity	2014-05-29 11:19:30 -07:00
max6697.h
mfd-mcp-sa11x0.h	mfd: Cleanup mfd-mcp-sa11x0.h header	2014-01-21 08:28:59 +00:00
microread.h
mmc-davinci.h
mmc-esdhc-imx.h	mmc: sdhci-esdhc-imx: add delay line setting support	2013-10-21 15:58:13 -04:00
mmc-msm_sdcc.h	mmc: msm: Cleanup mmc-msm_sdcc.h header	2014-02-25 15:43:15 -05:00
mmc-mvsdio.h	mmc: mvsdio: Cleanup mmc-mvsdio.h header	2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
mmc-omap.h	mmc: omap_hsmmc: Enable SDIO interrupt	2014-07-09 11:26:03 +02:00
mmc-pxamci.h
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
msm_serial_hs.h
mtd-davinci-aemif.h	ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif	2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h	mtd: nand: omap: Revert to using software ECC by default	2014-08-25 16:15:32 -07:00
mtd-nand-pxa3xx.h	mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding	2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h	mtd: nand: s3c2410: Trivial cleanup in header file	2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h	mtd: omap2: Cleanup header files	2014-01-11 11:39:18 -08:00
mtd-orion_nand.h	mtd: orion: Cleanup mtd-orion_nand.h header	2014-01-11 11:39:23 -08:00
mv_usb.h
net-cw1200.h
ntc_thermistor.h	hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS	2014-08-04 07:01:35 -07:00
omap1_bl.h
omap_drm.h
omap-twl4030.h
omap-wd-timer.h
pca953x.h
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h
pinctrl-single.h	pinctrl: single: Add support for auxdata	2013-10-10 15:30:47 -07:00
pn544.h	nfc: Fix FSF address in file headers	2013-12-11 10:56:21 -05:00
pxa2xx_udc.h
pxa_sdhci.h
rcar-du.h
remoteproc-omap.h
s3c-hsotg.h
s3c-hsudc.h
sa11x0-serial.h
samsung-usbphy.h
sc18is602.h
serial-imx.h	serial: imx: Remove init() and exit() platform callbacks	2014-02-28 16:36:45 -08:00
serial-omap.h
serial-sccnxp.h
sh_ipmmu.h
shmob_drm.h
sht15.h	hwmon: (sht15) add include guard	2014-01-14 21:36:53 -08:00
shtc1.h	hwmon: add support for Sensirion SHTC1 sensor	2014-06-12 08:36:48 -07:00
si5351.h	clk: si5351: remove variant from platform_data	2014-01-27 11:20:22 -08:00
simplefb.h
spi-clps711x.h
spi-davinci.h
spi-ep93xx.h
spi-imx.h
spi-nuc900.h	spi: nuc900: Cleanup spi-nuc900.h header	2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h
spi-s3c64xx.h	spi/s3c64xx: Trivial cleanup in header file	2014-02-16 09:59:13 +08:00
ssm2518.h
st21nfca.h	NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip	2014-04-22 00:37:25 +02:00
st21nfcb.h	NFC: st21nfcb: few code clean up	2014-07-23 00:49:37 +02:00
st1232_pdata.h
st_sensors_pdata.h
syscon.h	mfd: syscon: Add platform data with a regmap config name	2014-05-15 17:02:19 +01:00
tegra_emc.h
touchscreen-s3c2410.h	Input: s3c2410 - trivial cleanup in header file	2014-02-14 00:09:43 -08:00
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb3503.h
usb-davinci.h
usb-ehci-mxc.h	ARM: imx: move EHCI platform defines out of platform_data header	2014-07-18 16:10:04 +08:00
usb-ehci-orion.h	usb: ehci: Cleanup usb-ehci-orion.h header	2014-01-03 12:37:57 -08:00
usb-musb-ux500.h
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap1.h	usb: omap1: add extcon to platform data	2013-12-06 14:36:37 -06:00
usb-omap.h
usb-pxa3xx-ulpi.h
usb-rcar-gen2-phy.h	usb: phy: Add RCAR Gen2 USB phy	2013-10-10 11:59:48 -05:00
usb-rcar-phy.h
usb-s3c2410_udc.h
ux500_wdt.h
video_s3c.h
video-clcd-versatile.h	video: fix up versatile CLCD helper move	2014-07-23 17:41:00 +02:00
video-ep93xx.h	video: ep93xx: Cleanup video-ep93xx.h header	2014-01-17 10:57:41 +02:00
video-imxfb.h	video: imxfb: Remove unused fields from platform data structure	2014-02-28 12:35:22 +02:00
video-msm_fb.h	video: msm: Cleanup video-msm_fb.h header	2014-01-17 10:57:42 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h	video: pxa: Cleanup video-pxafb.h header	2014-01-17 10:57:42 +02:00
voltage-omap.h
vsp1.h	[media] v4l: vsp1: Add LUT support	2013-12-11 09:25:20 -02:00
wiznet.h
zforce_ts.h	Input: add driver for Neonode zForce based touchscreens	2013-10-31 08:46:08 -07:00