diff --git a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
index 26422f0f9080..b87292e05f2f 100644
--- a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
+++ b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
@@ -55,4 +55,4 @@ Maintainers
   This board is maintained by Simtec Electronics.
 
 
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 948c8718d967..2af2cf39915f 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -134,4 +134,4 @@ Authour
 
 
 Ben Dooks, 03 October 2004
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index cff6227b4484..081892df4fda 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -299,4 +299,4 @@ Port Contributors
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
+Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
index 295d971a15ed..f057876b920b 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
@@ -117,4 +117,4 @@ ATA
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
index ab2a88858f12..909bdc7dd7b5 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
@@ -18,4 +18,4 @@ Camera Interface
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index a30fe510572b..7edd0e2e6c5b 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -133,5 +133,5 @@ Configuration
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004 Simtec Electronics
+Ben Dooks, Copyright 2004 Simtec Electronics
 
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
index 67671eba4231..f82b1faefad5 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -90,4 +90,4 @@ Platform Data
 Document Author
 ---------------
 
-Ben Dooks, (c) 2005 Simtec Electronics
+Ben Dooks, Copyright 2005 Simtec Electronics
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 62152ae34758..7d0818797c85 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -760,6 +760,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/mach-dove/Kconfig"
 
+source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2ddc323b1c6a..8c0d08fbd991 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -179,9 +179,9 @@ plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
index 1535540edc82..3fd889200e99 100644
--- a/arch/arm/mach-s3c2400/include/mach/map.h
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2400/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3d4e9da3fa52..dd1fcc7e6708 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -81,6 +81,14 @@ config ARCH_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
+config H1940BT
+        tristate "Control the state of H1940 bluetooth chip"
+        depends on ARCH_H1940
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on h1940.
+
 config PM_H1940
 	bool
 	help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 2ab5ba4b266f..0d468e96e83e 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 # Machine support
 
 obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_H1940BT)		+= h1940-bluetooth.o
 obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 9a37c87152b0..217b102866d0 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/bast-irq.c
  *
- * Copyright (c) 2003,2005 Simtec Electronics
+ * Copyright 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -141,7 +141,7 @@ static __init int bast_irq_init(void)
 	unsigned int i;
 
 	if (machine_is_bast()) {
-		printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
 
 		/* zap all the IRQs */
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 9d1186877d08..75189df995ae 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/cpu-freq.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5aabf117cbb0..b7d1f8d27bc2 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -17,6 +17,7 @@
 #include <linux/ctype.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/rfkill.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
@@ -24,21 +25,10 @@
 
 #define DRV_NAME              "h1940-bt"
 
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
 /* Bluetooth control */
 static void h1940bt_enable(int on)
 {
 	if (on) {
-#ifdef CONFIG_LEDS_H1940
-		/* flashing Blue */
-		led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
 		/* Power on the chip */
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
@@ -46,48 +36,31 @@ static void h1940bt_enable(int on)
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
-		state = 1;
 	}
 	else {
-#ifdef CONFIG_LEDS_H1940
-		led_trigger_event(bt_led_trigger, 0);
-#endif
-
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		state = 0;
 	}
 }
 
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", state);
+	h1940bt_enable(!blocked);
+	return 0;
 }
 
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int new_state;
-	char *endp;
-
-	new_state = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
-		return -EINVAL;
-
-	h1940bt_enable(new_state);
-
-	return count;
-}
-static DEVICE_ATTR(enable, 0644,
-		h1940bt_show,
-		h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+	.set_block = h1940bt_set_block,
+};
 
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
+	struct rfkill *rfk;
+	int ret = 0;
+
 	/* Configures BT serial port GPIOs */
 	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
 	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev)
 	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
 	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
 
-	/* disable BT by default */
-	h1940bt_enable(0);
+	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+			&h1940bt_rfkill_ops, NULL);
+	if (!rfk) {
+		ret = -ENOMEM;
+		goto err_rfk_alloc;
+	}
 
-	return device_create_file(&pdev->dev, &dev_attr_enable);
+	rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+	ret = rfkill_register(rfk);
+	if (ret)
+		goto err_rfkill;
+
+	platform_set_drvdata(pdev, rfk);
+
+	return 0;
+
+err_rfkill:
+	rfkill_destroy(rfk);
+err_rfk_alloc:
+	return ret;
 }
 
 static int h1940bt_remove(struct platform_device *pdev)
 {
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_unregister_simple(bt_led_trigger);
-#endif
+	struct rfkill *rfk = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (rfk) {
+		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
+	rfk = NULL;
+
+	h1940bt_enable(0);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
index 20493b048360..bee2a7a932a0 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * BAST - CPLD control constants
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
index 501c202b53cf..cac428c42e7f 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
index c2c5baf07345..6e7dc9d0cf0e 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-map.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - Memory map definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
index 61684cb8ce59..4c38b39b741d 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 92e2687009ea..08ac5f96c012 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index 801dff13858d..035a493952db 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
  *
- * Copyright (c) 2003,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 - hardware
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
index 639eff523d4e..17380f848428 100644
--- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/osiris-map.h
  *
- * (c) 2005 Simtec Electronics
+ * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 2a5d90e957fb..9a0d169be137 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index f6e8eec879c8..ebc85c6dadbf 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *		           http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
index 2d36353f57d7..4932b87bdf3d 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-power.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-power.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index c9432103750d..72f756c5e504 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,7 +1,6 @@
-
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
- * Copyright (c) 2003, 2007 Simtec Electronics
+ * Copyright (c) 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
index f53f85b4ad8b..47add133b8ee 100644
--- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine VR1000 - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 647c9adb018f..4c79ac8a6c33 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -61,11 +61,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
 
-#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -247,7 +248,7 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-static struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition __initdata bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -273,7 +274,7 @@ static struct mtd_partition bast_default_nand_part[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set bast_nand_sets[] = {
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
 	[0] = {
 		.name		= "SmartMedia",
 		.nr_chips	= 1,
@@ -323,7 +324,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, BAST_VA_CTRL2);
 }
 
-static struct s3c2410_platform_nand bast_nand_info = {
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
 	.tacls		= 30,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -608,6 +609,11 @@ static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.need_io	= 1,
 };
 
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -625,7 +631,6 @@ static void __init bast_map_io(void)
 
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
-	s3c_device_nand.dev.platform_data = &bast_nand_info;
 	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
@@ -639,6 +644,7 @@ static void __init bast_init(void)
 	sysdev_register(&bast_pm_sysdev);
 
 	s3c_i2c0_set_platdata(&bast_i2c_info);
+	s3c_nand_set_platdata(&bast_nand_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 
@@ -647,6 +653,7 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, &bast_audio);
 
 	s3c_cpufreq_setboard(&bast_cpufreq);
 }
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index d9cd5ddecf4a..49053254c98d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -21,6 +21,11 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,9 +37,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <mach/gpio-nrs.h>
+
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
@@ -46,6 +54,7 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
+#include <plat/mci.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
@@ -171,16 +180,90 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
 	.gpdup_mask=	0xffffffff,
 };
 
-static struct platform_device s3c_device_leds = {
+static struct platform_device h1940_device_leds = {
 	.name             = "h1940-leds",
 	.id               = -1,
 };
 
-static struct platform_device s3c_device_bluetooth = {
+static struct platform_device h1940_device_bluetooth = {
 	.name             = "h1940-bt",
 	.id               = -1,
 };
 
+static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+	.gpio_detect   = S3C2410_GPF(5),
+	.gpio_wprotect = S3C2410_GPH(8),
+	.set_power     = NULL,
+	.ocr_avail     = MMC_VDD_32_33,
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+	gpio_request(S3C2410_GPB(0), "Backlight");
+
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
+	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+	return 0;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 0,
+	.max_brightness = 100,
+	.dft_brightness = 50,
+	/* tcnt = 0x31 */
+	.pwm_period_ns  = 36296,
+	.init           = h1940_backlight_init,
+	.exit           = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+	.name = "pwm-backlight",
+	.dev  = {
+		.parent = &s3c_device_timer[0].dev,
+		.platform_data = &backlight_data,
+	},
+	.id   = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+					unsigned int power)
+{
+	int value;
+
+	if (!power) {
+		/* set to 3ec */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+		/* wait for 3ac */
+		do {
+			value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+		} while (value);
+		/* set to 38c */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+	} else {
+		/* Set to 3ac */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+		/* Set to 3ad */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+	}
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+	.set_power      = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+	.name                   = "platform-lcd",
+	.dev.parent             = &s3c_device_lcd.dev,
+	.dev.platform_data      = &h1940_lcd_power_data,
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -188,8 +271,13 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
-	&s3c_device_leds,
-	&s3c_device_bluetooth,
+	&h1940_device_leds,
+	&h1940_device_bluetooth,
+	&s3c_device_sdi,
+	&s3c_device_rtc,
+	&s3c_device_timer[0],
+	&h1940_backlight,
+	&h1940_lcd_powerdev,
 };
 
 static void __init h1940_map_io(void)
@@ -219,6 +307,8 @@ static void __init h1940_init(void)
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
+
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
@@ -231,6 +321,11 @@ static void __init h1940_init(void)
 	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
+	gpio_request(S3C2410_GPC(0), "LCD power");
+	gpio_request(S3C2410_GPC(5), "LCD power");
+	gpio_request(S3C2410_GPC(6), "LCD power");
+
+
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0f6ed61af415..0405712c2263 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -338,7 +338,7 @@ static struct platform_device *n35_devices[] __initdata = {
 	&n35_button_device,
 };
 
-static struct s3c2410_platform_i2c n30_i2ccfg = {
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
 	.flags		= 0,
 	.slave_addr	= 0x10,
 	.frequency	= 10*1000,
@@ -500,8 +500,8 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
 	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 2cc9849eb448..ab092bcda393 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -258,7 +258,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&qt2410_led,
 };
 
-static struct mtd_partition qt2410_nand_part[] = {
+static struct mtd_partition __initdata qt2410_nand_part[] = {
 	[0] = {
 		.name	= "U-Boot",
 		.size	= 0x30000,
@@ -286,7 +286,7 @@ static struct mtd_partition qt2410_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set qt2410_nand_sets[] = {
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -299,7 +299,7 @@ static struct s3c2410_nand_set qt2410_nand_sets[] = {
  * chips and beyond.
  */
 
-static struct s3c2410_platform_nand qt2410_nand_info = {
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -331,7 +331,7 @@ static void __init qt2410_map_io(void)
 
 static void __init qt2410_machine_init(void)
 {
-	s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+	s3c_nand_set_platdata(&qt2410_nand_info);
 
 	switch (tft_type) {
 	case 'p': /* production */
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 1628cc773a2c..0d61fb577170 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -393,6 +394,7 @@ static void __init vr1000_init(void)
 				ARRAY_SIZE(vr1000_i2c_devs));
 
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, NULL);
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index f178c2fd9d85..8338865e11c0 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/pll.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 50e25fc5f8ab..6b9d0d83a6f9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -108,7 +108,7 @@ int usb_simtec_init(void)
 {
 	int ret;
 
-	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
+	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
 
 	ret = gpio_request(S3C2410_GPB(4), "USB power control");
 	if (ret < 0) {
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8df506eac903..c9fa3fca486c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -96,7 +96,7 @@ static struct s3c2410_uartcfg jive_uartcfgs[] = {
  * 0x017d0000-0x02bd0000 : cramfs B
  * 0x02bd0000-0x03fd0000 : yaffs
  */
-static struct mtd_partition jive_imageA_nand_part[] = {
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -154,7 +154,7 @@ static struct mtd_partition jive_imageA_nand_part[] = {
         },
 };
 
-static struct mtd_partition jive_imageB_nand_part[] = {
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -213,7 +213,7 @@ static struct mtd_partition jive_imageB_nand_part[] = {
         },
 };
 
-static struct s3c2410_nand_set jive_nand_sets[] = {
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
 	[0] = {
 		.name           = "flash",
 		.nr_chips       = 1,
@@ -222,7 +222,7 @@ static struct s3c2410_nand_set jive_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand jive_nand_info = {
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
 	/* set taken from osiris nand timings, possibly still conservative */
 	.tacls		= 30,
 	.twrph0		= 55,
@@ -631,7 +631,8 @@ static void __init jive_machine_init(void)
 
 	s3c_pm_init();
 
-	s3c_device_nand.dev.platform_data = &jive_nand_info;
+	/** TODO - check that this is after the cmdline option! */
+	s3c_nand_set_platdata(&jive_nand_info);
 
 	/* initialise the spi */
 
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 11e8ad49fc7b..a6ba591b26bb 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -76,7 +76,7 @@ static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
 	}
 };
 
-static struct mtd_partition vstms_nand_part[] = {
+static struct mtd_partition __initdata vstms_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= 0x7C000,
@@ -99,7 +99,7 @@ static struct mtd_partition vstms_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set vstms_nand_sets[] = {
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -112,7 +112,7 @@ static struct s3c2410_nand_set vstms_nand_sets[] = {
  * chips and beyond.
 */
 
-static struct s3c2410_platform_nand vstms_nand_info = {
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -143,8 +143,6 @@ static void __init vstms_fixup(struct machine_desc *desc,
 
 static void __init vstms_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &vstms_nand_info;
-
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
@@ -153,6 +151,8 @@ static void __init vstms_map_io(void)
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&vstms_nand_info);
+
 	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a8b69d77571b..cf10e14b7b49 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -53,6 +53,19 @@ config MACH_OSIRIS
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
 
+config MACH_OSIRIS_DVS
+	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+	depends on MACH_OSIRIS
+	select TPS65010
+	help
+	  Say Y/M here if you want to have dynamic voltage scaling support
+	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+	  The DVS driver alters the voltage supplied to the ARM core
+	  depending on the frequency it is running at. The driver itself
+	  does not do any of the frequency alteration, which is left up
+	  to the cpufreq driver.
+
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index bfadcf684a2a..5f3224531885 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -23,3 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+
+# extra machine support
+
+obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 63c5ab65727f..0c049b95c378 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 68f3870991bf..62a4c3eba97f 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -53,8 +53,9 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/audio-simtec.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
 static struct map_desc anubis_iodesc[] __initdata = {
   /* ISA IO areas */
@@ -138,7 +139,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -161,7 +162,7 @@ static struct mtd_partition anubis_default_nand_part[] = {
 	}
 };
 
-static struct mtd_partition anubis_default_nand_part_large[] = {
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -191,7 +192,7 @@ static struct mtd_partition anubis_default_nand_part_large[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set anubis_nand_sets[] = {
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -233,7 +234,7 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
 }
 
-static struct s3c2410_platform_nand anubis_nand_info = {
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -437,6 +438,17 @@ static struct i2c_board_info anubis_i2c_devs[] __initdata = {
 	}
 };
 
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+	.output_cdclk	= 1,
+	.use_mpllin	= 1,
+	.amp_gpio	= S3C2410_GPB(2),
+	.amp_gain[0]	= S3C2410_GPD(10),
+	.amp_gain[1]	= S3C2410_GPD(11),
+};
+
 static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
@@ -454,8 +466,6 @@ static void __init anubis_map_io(void)
 
 	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
 
-	s3c_device_nand.dev.platform_data = &anubis_nand_info;
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
@@ -476,6 +486,9 @@ static void __init anubis_map_io(void)
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&anubis_nand_info);
+	simtec_audio_add(NULL, false, &anubis_audio);
+
 	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 
 	i2c_register_board_info(0, anubis_i2c_devs,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index dfc7010935da..aa69290e04c6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -96,7 +96,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
 
 /* NAND Flash on AT2440EVB board */
 
-static struct mtd_partition at2440evb_default_nand_part[] = {
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_256K,
@@ -114,7 +114,7 @@ static struct mtd_partition at2440evb_default_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
 	[0] = {
 		.name		= "nand",
 		.nr_chips	= 1,
@@ -123,7 +123,7 @@ static struct s3c2410_nand_set at2440evb_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand at2440evb_nand_info = {
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 
 static void __init at2440evb_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
-	s3c_device_sdi.name = "s3c2440-sdi";
 	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
@@ -228,6 +226,7 @@ static void __init at2440evb_map_io(void)
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 1c3382fefdd2..547d4fc99131 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -532,7 +532,6 @@ static void __init mini2440_map_io(void)
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 
-	s3c_device_nand.dev.platform_data = &mini2440_nand_info;
 	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
 }
 
@@ -677,8 +676,11 @@ static void __init mini2440_init(void)
 		printk("\n");
 		s3c24xx_fb_set_platdata(&mini2440_fb_info);
 	}
+
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
+
 	i2c_register_board_info(0, mini2440_i2c_devs,
 				ARRAY_SIZE(mini2440_i2c_devs));
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
new file mode 100644
index 000000000000..ad2792dfbee1
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
@@ -0,0 +1,194 @@
+/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Osiris Dynamic Voltage Scaling support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <plat/cpu-freq.h>
+
+#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+	unsigned vregs1 = 0, vdcdc2 = 0;
+
+	if (!on) {
+		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
+	}
+
+	dvs_en = on;
+	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+	tps65010_config_vregs1(vregs1);
+	tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+	/* at the moment, we assume ARMCLK = HCLK => DVS */
+	return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+			      unsigned long val, void *data)
+{
+	struct cpufreq_freqs *cf = data;
+	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+	bool old_dvs = is_dvs(&freqs->old);
+	bool new_dvs = is_dvs(&freqs->new);
+	int ret = 0;
+
+	if (!dvs_en)
+		return 0;
+
+	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+	       freqs->old.armclk, freqs->old.hclk,
+	       freqs->new.armclk, freqs->new.hclk);
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (old_dvs & !new_dvs ||
+		    cur_dvs & !new_dvs) {
+			pr_debug("%s: exiting dvs\n", __func__);
+			cur_dvs = false;
+			gpio_set_value(OSIRIS_GPIO_DVS, 1);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if (!old_dvs & new_dvs ||
+		    !cur_dvs & new_dvs) {
+			pr_debug("entering dvs\n");
+			cur_dvs = true;
+			gpio_set_value(OSIRIS_GPIO_DVS, 0);
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+	.notifier_call	= osiris_dvs_notify,
+};
+
+static int __devinit osiris_dvs_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	dev_info(&pdev->dev, "initialising\n");
+
+	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+	if (ret) {
+		dev_err(&pdev->dev, "cannot claim gpio\n");
+		goto err_nogpio;
+	}
+
+	/* start with dvs disabled */
+	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+	ret = cpufreq_register_notifier(&osiris_dvs_nb,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register with cpufreq\n");
+		goto err_nofreq;
+	}
+
+	osiris_dvs_tps_setdvs(true);
+
+	return 0;
+
+err_nofreq:
+	gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+	return ret;
+}
+
+static int __devexit osiris_dvs_remove(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "exiting\n");
+
+	/* disable any current dvs */
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+
+	cpufreq_unregister_notifier(&osiris_dvs_nb,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+
+	gpio_free(OSIRIS_GPIO_DVS);
+
+	return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+	cur_dvs = false;
+
+	return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+	osiris_dvs_tps_setdvs(true);
+	return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+	.suspend	= osiris_dvs_suspend,
+	.resume		= osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+	.probe		= osiris_dvs_probe,
+	.remove		= __devexit_p(osiris_dvs_remove),
+	.driver		= {
+		.name	= "osiris-dvs",
+		.owner	= THIS_MODULE,
+		.pm	= &osiris_dvs_pm,
+	},
+};
+
+static int __init osiris_dvs_init(void)
+{
+	return platform_driver_register(&osiris_dvs_driver);
+}
+
+static void __exit osiris_dvs_exit(void)
+{
+	platform_driver_unregister(&osiris_dvs_driver);
+}
+
+module_init(osiris_dvs_init);
+module_exit(osiris_dvs_exit);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 2105a41281a4..015dfb2a80da 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
- * Copyright (c) 2005,2008 Simtec Electronics
+ * Copyright (c) 2005-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -23,6 +23,8 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 
+#include <linux/i2c/tps65010.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -148,7 +150,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition osiris_default_nand_part[] = {
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -171,7 +173,7 @@ static struct mtd_partition osiris_default_nand_part[] = {
 	}
 };
 
-static struct mtd_partition osiris_default_nand_part_large[] = {
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -201,7 +203,7 @@ static struct mtd_partition osiris_default_nand_part_large[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set osiris_nand_sets[] = {
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -243,7 +245,7 @@ static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 }
 
-static struct s3c2410_platform_nand osiris_nand_info = {
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -326,12 +328,44 @@ static struct sys_device osiris_pm_sysdev = {
 	.cls		= &osiris_pm_sysclass,
 };
 
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+	/* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+	.name	= "osiris-dvs",
+	.id	= -1,
+	.dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+	osiris_tps_device.dev.parent = &client->dev;
+	return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+	platform_device_unregister(&osiris_tps_device);
+	return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+	.base		= -1,	/* GPIO can go anywhere at the moment */
+	.setup		= osiris_tps_setup,
+	.teardown	= osiris_tps_remove,
+};
+
 /* I2C devices fitted. */
 
 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 	{
 		I2C_BOARD_INFO("tps65011", 0x48),
 		.irq	= IRQ_EINT20,
+		.platform_data = &osiris_tps_board,
 	},
 };
 
@@ -377,8 +411,6 @@ static void __init osiris_map_io(void)
 
 	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
 
-	s3c_device_nand.dev.platform_data = &osiris_nand_info;
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
@@ -408,6 +440,7 @@ static void __init osiris_init(void)
 	sysdev_register(&osiris_pm_sysdev);
 
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&osiris_nand_info);
 
 	s3c_cpufreq_setboard(&osiris_cpufreq);
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bc8d8d1ebd1a..a952a13afb1f 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-rx3715.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.handhelds.org/projects/rx3715.html
@@ -149,7 +149,7 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
 	.gpdup_mask =	0xffffffff,
 };
 
-static struct mtd_partition rx3715_nand_part[] = {
+static struct mtd_partition __initdata rx3715_nand_part[] = {
 	[0] = {
 		.name		= "Whole Flash",
 		.offset		= 0,
@@ -158,7 +158,7 @@ static struct mtd_partition rx3715_nand_part[] = {
 	}
 };
 
-static struct s3c2410_nand_set rx3715_nand_sets[] = {
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
 	[0] = {
 		.name		= "Internal",
 		.nr_chips	= 1,
@@ -167,7 +167,7 @@ static struct s3c2410_nand_set rx3715_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand rx3715_nand_info = {
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 50,
 	.twrph1		= 15,
@@ -186,8 +186,6 @@ static struct platform_device *rx3715_devices[] __initdata = {
 
 static void __init rx3715_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &rx3715_nand_info;
-
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
@@ -205,6 +203,7 @@ static void __init rx3715_init_machine(void)
 #endif
 	s3c_pm_init();
 
+	s3c_nand_set_platdata(&rx3715_nand_info);
 	s3c24xx_fb_set_platdata(&rx3715_fb_info);
 	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
 }
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index db6eafbd4d90..ec13e748ccc5 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.fluff.org/ben/smdk2440/
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0fb385bd9cd9..f76d6ff4aeb9 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -423,7 +423,7 @@ static struct i2c_board_info gta02_i2c_devs[] __initdata = {
 	},
 };
 
-static struct s3c2410_nand_set gta02_nand_sets[] = {
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
 	[0] = {
 		/*
 		 * This name is also hard-coded in the boot loaders, so
@@ -442,7 +442,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
  * data sheet (K5D2G13ACM-D075 MCP Memory).
  */
 
-static struct s3c2410_platform_nand gta02_nand_info = {
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 	.tacls		= 0,
 	.twrph0		= 25,
 	.twrph1		= 15,
@@ -621,9 +621,9 @@ static void __init gta02_machine_init(void)
 #endif
 
 	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-	s3c_device_nand.dev.platform_data = &gta02_nand_info;
 
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_nand_set_platdata(&gta02_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 79e4d93ea2b6..d88c8b24fe34 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007  Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
index af2abd756c30..be0af518b488 100644
--- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index fc8b223bad4f..f3b48f841d84 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -64,6 +64,9 @@
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -79,5 +82,6 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
index 47019795ce06..f56611526c63 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h
+++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
@@ -1,195 +1,30 @@
-/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
+ * Copyright 2009 Samsung Electronics Co.
  *
- * S3C64XX - new-style framebuffer register definitions
+ * Pawel Osciak <p.osciak@samsung.com>
+ * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
  *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
- *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
+ * Framebuffer register definitions for Samsung S3C64xx.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
 
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
-#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
-#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
-#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
-
-/* Video buffer addresses */
-
-#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
-
-#define VIDINTCON0				(0x130)
-
-#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
-
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+#include <plat/regs-fb-v4.h>
 
 /* Palette registers */
-
 #define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
 #define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
 #define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
 #define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
 #define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
 
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
-	if (win < 2)
-		return 256;
-	if (win < 4)
-		return 16;
-	if (win == 4)
-		return 4;
-
-	BUG();	/* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
-	/* all windows can do 1/2 bpp */
-
-	if ((bpp == 25 || bpp == 19) && win == 0)
-		return 0;	/* win 0 does not have 19 or 25bpp modes */
-
-	if (bpp == 4 && win == 4)
-		return 0;
-
-	if (bpp == 8 && (win >= 3))
-		return 0;	/* win 3/4 cannot do 8bpp in any mode */
-
-	return 1;
-}
-
 static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 {
 	switch (window) {
@@ -203,57 +38,4 @@ static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 	BUG();
 }
 
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
-	return window > 1;
-}
-
-struct s3c_fb_palette {
-	struct fb_bitfield	r;
-	struct fb_bitfield	g;
-	struct fb_bitfield	b;
-	struct fb_bitfield	a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
-				       struct s3c_fb_palette *palette)
-{
-	if (window < 2) {
-		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
-		palette->r.offset = 16;
-		palette->r.length = 8;
-		palette->g.offset = 8;
-		palette->g.length = 8;
-		palette->b.offset = 0;
-		palette->b.length = 8;
-	} else {
-		/* currently we assume RGB 5/6/5 */
-		palette->r.offset = 11;
-		palette->r.length = 5;
-		palette->g.offset = 5;
-		palette->g.length = 6;
-		palette->b.offset = 0;
-		palette->b.length = 5;
-	}
-}
-
-/* Notes on per-window bpp settings
- *
- * Value	Win0	 Win1	  Win2	   Win3	    Win 4
- * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
- * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
- * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
- * 0011		8(P)	 8(P)     -none-   -none-   -none-
- * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
- * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
- * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
- * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
- * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
- * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
- * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
- * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
- * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
- * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
- * 1110		-none-	 -none-	  -none-   -none-    -none-
- * 1111		-none-	 -none-   -none-   -none-    -none-
-*/
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index b42bdd0f2138..d876ee503671 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -45,6 +45,7 @@ void __init s3c6400_map_io(void)
 
 	s3c6400_default_sdhci0();
 	s3c6400_default_sdhci1();
+	s3c6400_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 9b67c663d9d8..522c08691952 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -58,6 +58,7 @@ void __init s3c6410_map_io(void)
 	/* initialise device information early */
 	s3c6410_default_sdhci0();
 	s3c6410_default_sdhci1();
+	s3c6410_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index c5741056193f..cdd4b5378552 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -250,7 +250,7 @@ static void __init hmt_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
 	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+	s3c_nand_set_platdata(&hmt_nand_info);
 
 	gpio_request(S3C64XX_GPC(7), "usb power");
 	gpio_direction_output(S3C64XX_GPC(7), 0);
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 9f1a21462620..480d297c1de2 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -184,6 +185,43 @@ static struct platform_device smdk6410_smsc911x = {
 	},
 };
 
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "PVDD",
+		.dev_name = "0-001b",
+	},
+	{
+		/* WM8580 */
+		.supply = "AVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+	.supply_name = "B_PWR_5V",
+	.microvolts = 5000000,
+	.init_data = &smdk6410_b_pwr_5v_data,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+	.name          = "reg-fixed-voltage",
+	.id            = -1,
+	.dev = {
+		.platform_data = &smdk6410_b_pwr_5v_pdata,
+	},
+};
+#endif
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -198,6 +236,10 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_usb,
 	&s3c_device_usb_hsotg,
+
+#ifdef CONFIG_REGULATOR
+	&smdk6410_b_pwr_5v,
+#endif
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
@@ -232,6 +274,14 @@ static struct regulator_init_data wm8350_dcdc3_data = {
 };
 
 /* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "DVDD",
+		.dev_name = "0-001b",
+	},
+};
+
 static struct regulator_init_data wm8350_dcdc4_data = {
 	.constraints = {
 		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
@@ -239,6 +289,8 @@ static struct regulator_init_data wm8350_dcdc4_data = {
 		.max_uV = 3000000,
 		.always_on = 1,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
 };
 
 /* ARM core */
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b1a4ba504416..0dd2b8c6eabe 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -14,9 +14,23 @@ config CPU_S5PC100
 	help
 	  Enable S5PC100 CPU support
 
+config S5PC100_SETUP_SDHCI
+        bool
+        select S5PC1XX_SETUP_SDHCI_GPIO
+        help
+          Internal helper functions for S5PC100 based SDHCI systems
+
 config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
+	select S3C_DEV_FB
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S5PC1XX_SETUP_I2C0
 	select S5PC1XX_SETUP_I2C1
+	select S5PC1XX_SETUP_FB_24BPP
+	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index afc89b381d7a..809ff10f768f 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -13,5 +13,9 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
 
+# Helper and device support
+
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
+
 # machine support
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 0e718890da32..d79e7574a852 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,6 +22,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
+#include <asm/proc-fns.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -32,6 +34,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-power.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -45,6 +48,23 @@
 static struct map_desc s5pc100_iodesc[] __initdata = {
 };
 
+static void s5pc100_idle(void)
+{
+	unsigned long tmp;
+
+	tmp = __raw_readl(S5PC100_PWR_CFG);
+	tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
+	tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
+	tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
+	__raw_writel(tmp, S5PC100_PWR_CFG);
+
+	tmp = __raw_readl(S5PC100_OTHERS);
+	tmp |= S5PC100_PMU_INT_DISABLE;
+	__raw_writel(tmp, S5PC100_OTHERS);
+
+	cpu_do_idle();
+}
+
 /* s5pc100_map_io
  *
  * register the standard cpu IO areas
@@ -55,6 +75,13 @@ void __init s5pc100_map_io(void)
 	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
 
 	/* initialise device information early */
+	s5pc100_default_sdhci0();
+	s5pc100_default_sdhci1();
+	s5pc100_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
 }
 
 void __init s5pc100_init_clocks(int xtal)
@@ -93,5 +120,7 @@ int __init s5pc100_init(void)
 {
 	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
 
+	s5pc1xx_idle = s5pc100_idle;
+
 	return sysdev_register(&s5pc100_sysdev);
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index c74fc93d7d15..2c4cbe8ee6b7 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -18,40 +18,45 @@
 #define gpio_to_irq	__gpio_to_irq
 
 /* GPIO bank sizes */
-#define S5PC1XX_GPIO_A0_NR	(8)
-#define S5PC1XX_GPIO_A1_NR	(5)
-#define S5PC1XX_GPIO_B_NR	(8)
-#define S5PC1XX_GPIO_C_NR	(5)
-#define S5PC1XX_GPIO_D_NR	(7)
-#define S5PC1XX_GPIO_E0_NR	(8)
-#define S5PC1XX_GPIO_E1_NR	(6)
-#define S5PC1XX_GPIO_F0_NR	(8)
-#define S5PC1XX_GPIO_F1_NR	(8)
-#define S5PC1XX_GPIO_F2_NR	(8)
-#define S5PC1XX_GPIO_F3_NR	(4)
-#define S5PC1XX_GPIO_G0_NR	(8)
-#define S5PC1XX_GPIO_G1_NR	(3)
-#define S5PC1XX_GPIO_G2_NR	(7)
-#define S5PC1XX_GPIO_G3_NR	(7)
-#define S5PC1XX_GPIO_H0_NR	(8)
-#define S5PC1XX_GPIO_H1_NR	(8)
-#define S5PC1XX_GPIO_H2_NR	(8)
-#define S5PC1XX_GPIO_H3_NR	(8)
-#define S5PC1XX_GPIO_I_NR	(8)
-#define S5PC1XX_GPIO_J0_NR	(8)
-#define S5PC1XX_GPIO_J1_NR	(5)
-#define S5PC1XX_GPIO_J2_NR	(8)
-#define S5PC1XX_GPIO_J3_NR	(8)
-#define S5PC1XX_GPIO_J4_NR	(4)
-#define S5PC1XX_GPIO_K0_NR	(8)
-#define S5PC1XX_GPIO_K1_NR	(6)
-#define S5PC1XX_GPIO_K2_NR	(8)
-#define S5PC1XX_GPIO_K3_NR	(8)
-#define S5PC1XX_GPIO_MP00_NR	(8)
-#define S5PC1XX_GPIO_MP01_NR	(8)
-#define S5PC1XX_GPIO_MP02_NR	(8)
-#define S5PC1XX_GPIO_MP03_NR	(8)
-#define S5PC1XX_GPIO_MP04_NR	(5)
+#define S5PC100_GPIO_A0_NR	(8)
+#define S5PC100_GPIO_A1_NR	(5)
+#define S5PC100_GPIO_B_NR	(8)
+#define S5PC100_GPIO_C_NR	(5)
+#define S5PC100_GPIO_D_NR	(7)
+#define S5PC100_GPIO_E0_NR	(8)
+#define S5PC100_GPIO_E1_NR	(6)
+#define S5PC100_GPIO_F0_NR	(8)
+#define S5PC100_GPIO_F1_NR	(8)
+#define S5PC100_GPIO_F2_NR	(8)
+#define S5PC100_GPIO_F3_NR	(4)
+#define S5PC100_GPIO_G0_NR	(8)
+#define S5PC100_GPIO_G1_NR	(3)
+#define S5PC100_GPIO_G2_NR	(7)
+#define S5PC100_GPIO_G3_NR	(7)
+#define S5PC100_GPIO_H0_NR	(8)
+#define S5PC100_GPIO_H1_NR	(8)
+#define S5PC100_GPIO_H2_NR	(8)
+#define S5PC100_GPIO_H3_NR	(8)
+#define S5PC100_GPIO_I_NR	(8)
+#define S5PC100_GPIO_J0_NR	(8)
+#define S5PC100_GPIO_J1_NR	(5)
+#define S5PC100_GPIO_J2_NR	(8)
+#define S5PC100_GPIO_J3_NR	(8)
+#define S5PC100_GPIO_J4_NR	(4)
+#define S5PC100_GPIO_K0_NR	(8)
+#define S5PC100_GPIO_K1_NR	(6)
+#define S5PC100_GPIO_K2_NR	(8)
+#define S5PC100_GPIO_K3_NR	(8)
+#define S5PC100_GPIO_L0_NR	(8)
+#define S5PC100_GPIO_L1_NR	(8)
+#define S5PC100_GPIO_L2_NR	(8)
+#define S5PC100_GPIO_L3_NR	(8)
+#define S5PC100_GPIO_L4_NR	(8)
+#define S5PC100_GPIO_MP00_NR	(8)
+#define S5PC100_GPIO_MP01_NR	(8)
+#define S5PC100_GPIO_MP02_NR	(8)
+#define S5PC100_GPIO_MP03_NR	(8)
+#define S5PC100_GPIO_MP04_NR	(5)
 
 /* GPIO bank numbes */
 
@@ -64,83 +69,94 @@
 	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
 
 enum s3c_gpio_number {
-	S5PC1XX_GPIO_A0_START 	= 0,
-	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
-	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
-	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
-	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
-	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
-	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
-	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
-	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
-	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
-	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
-	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
-	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
-	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
-	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
-	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
-	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
-	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
-	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
-	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
-	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
-	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
-	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
-	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
-	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
-	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
-	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
-	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
-	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
-	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
-	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
-	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
-	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
-	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+	S5PC100_GPIO_A0_START	= 0,
+	S5PC100_GPIO_A1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
+	S5PC100_GPIO_B_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
+	S5PC100_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
+	S5PC100_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
+	S5PC100_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
+	S5PC100_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
+	S5PC100_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
+	S5PC100_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
+	S5PC100_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
+	S5PC100_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
+	S5PC100_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
+	S5PC100_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
+	S5PC100_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
+	S5PC100_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
+	S5PC100_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
+	S5PC100_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
+	S5PC100_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
+	S5PC100_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
+	S5PC100_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
+	S5PC100_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
+	S5PC100_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
+	S5PC100_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
+	S5PC100_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
+	S5PC100_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
+	S5PC100_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
+	S5PC100_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
+	S5PC100_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
+	S5PC100_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
+	S5PC100_GPIO_L0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
+	S5PC100_GPIO_L1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
+	S5PC100_GPIO_L2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
+	S5PC100_GPIO_L3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
+	S5PC100_GPIO_L4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
+	S5PC100_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
+	S5PC100_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
+	S5PC100_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
+	S5PC100_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
+	S5PC100_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
+	S5PC100_GPIO_END	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
 };
 
-/* S5PC1XX GPIO number definitions. */
-#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
-#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
-#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
-#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
-#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
-#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
-#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
-#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
-#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
-#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
-#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
-#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
-#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
-#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
-#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
-#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
-#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
-#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
-#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
-#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
-#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
-#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
-#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
-#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
-#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
-#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
-#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
-#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
-#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
-#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
-#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
-#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
-#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
-#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+/* S5PC100 GPIO number definitions. */
+#define S5PC100_GPA0(_nr)	(S5PC100_GPIO_A0_START + (_nr))
+#define S5PC100_GPA1(_nr)	(S5PC100_GPIO_A1_START + (_nr))
+#define S5PC100_GPB(_nr)	(S5PC100_GPIO_B_START + (_nr))
+#define S5PC100_GPC(_nr)	(S5PC100_GPIO_C_START + (_nr))
+#define S5PC100_GPD(_nr)	(S5PC100_GPIO_D_START + (_nr))
+#define S5PC100_GPE0(_nr)	(S5PC100_GPIO_E0_START + (_nr))
+#define S5PC100_GPE1(_nr)	(S5PC100_GPIO_E1_START + (_nr))
+#define S5PC100_GPF0(_nr)	(S5PC100_GPIO_F0_START + (_nr))
+#define S5PC100_GPF1(_nr)	(S5PC100_GPIO_F1_START + (_nr))
+#define S5PC100_GPF2(_nr)	(S5PC100_GPIO_F2_START + (_nr))
+#define S5PC100_GPF3(_nr)	(S5PC100_GPIO_F3_START + (_nr))
+#define S5PC100_GPG0(_nr)	(S5PC100_GPIO_G0_START + (_nr))
+#define S5PC100_GPG1(_nr)	(S5PC100_GPIO_G1_START + (_nr))
+#define S5PC100_GPG2(_nr)	(S5PC100_GPIO_G2_START + (_nr))
+#define S5PC100_GPG3(_nr)	(S5PC100_GPIO_G3_START + (_nr))
+#define S5PC100_GPH0(_nr)	(S5PC100_GPIO_H0_START + (_nr))
+#define S5PC100_GPH1(_nr)	(S5PC100_GPIO_H1_START + (_nr))
+#define S5PC100_GPH2(_nr)	(S5PC100_GPIO_H2_START + (_nr))
+#define S5PC100_GPH3(_nr)	(S5PC100_GPIO_H3_START + (_nr))
+#define S5PC100_GPI(_nr)	(S5PC100_GPIO_I_START + (_nr))
+#define S5PC100_GPJ0(_nr)	(S5PC100_GPIO_J0_START + (_nr))
+#define S5PC100_GPJ1(_nr)	(S5PC100_GPIO_J1_START + (_nr))
+#define S5PC100_GPJ2(_nr)	(S5PC100_GPIO_J2_START + (_nr))
+#define S5PC100_GPJ3(_nr)	(S5PC100_GPIO_J3_START + (_nr))
+#define S5PC100_GPJ4(_nr)	(S5PC100_GPIO_J4_START + (_nr))
+#define S5PC100_GPK0(_nr)	(S5PC100_GPIO_K0_START + (_nr))
+#define S5PC100_GPK1(_nr)	(S5PC100_GPIO_K1_START + (_nr))
+#define S5PC100_GPK2(_nr)	(S5PC100_GPIO_K2_START + (_nr))
+#define S5PC100_GPK3(_nr)	(S5PC100_GPIO_K3_START + (_nr))
+#define S5PC100_GPL0(_nr)	(S5PC100_GPIO_L0_START + (_nr))
+#define S5PC100_GPL1(_nr)	(S5PC100_GPIO_L1_START + (_nr))
+#define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
+#define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
+#define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
+#define S5PC100_MP00(_nr)	(S5PC100_GPIO_MP00_START + (_nr))
+#define S5PC100_MP01(_nr)	(S5PC100_GPIO_MP01_START + (_nr))
+#define S5PC100_MP02(_nr)	(S5PC100_GPIO_MP02_START + (_nr))
+#define S5PC100_MP03(_nr)	(S5PC100_GPIO_MP03_START + (_nr))
+#define S5PC100_MP04(_nr)	(S5PC100_GPIO_MP04_START + (_nr))
+#define S5PC100_MP05(_nr)	(S5PC100_GPIO_MP05_START + (_nr))
 
-/* the end of the S5PC1XX specific gpios */
-#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
-#define S3C_GPIO_END		S5PC1XX_GPIO_END
+/* It used the end of the S5PC1XX gpios */
+#define S3C_GPIO_END		S5PC100_GPIO_END
 
 /* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 622720dba289..b53fa48a52c6 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,4 +11,9 @@
 
 #include <plat/irqs.h>
 
+/* LCD */
+#define IRQ_LCD_FIFO		IRQ_LCD0
+#define IRQ_LCD_VSYNC		IRQ_LCD1
+#define IRQ_LCD_SYSTEM		IRQ_LCD2
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 9e9f39130b2c..4681ebe8bef6 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -17,6 +17,19 @@
 
 #include <plat/map-base.h>
 
+/*
+ * map-base.h has already defined virtual memory address
+ * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
+ * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
+ * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
+ * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
+ * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
+ * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
+ *
+ * S5PC100 specific virtual memory address can be defined here
+ * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
+ *
+ */
 
 /* Chip ID */
 #define S5PC100_PA_CHIPID	(0xE0000000)
@@ -24,13 +37,20 @@
 #define S5PC1XX_VA_CHIPID	S3C_VA_SYS
 
 /* System */
-#define S5PC100_PA_SYS		(0xE0100000)
-#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
-#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC100_PA_CLK		(0xE0100000)
+#define S5PC100_PA_CLK_OTHER	(0xE0200000)
+#define S5PC100_PA_PWR		(0xE0108000)
 #define S5PC1XX_PA_CLK		S5PC100_PA_CLK
 #define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_PA_CLK_OTHER	S5PC100_PA_CLK_OTHER
 #define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
 #define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+#define S5PC1XX_VA_CLK_OTHER	(S3C_VA_SYS + 0x30000)
+
+/* GPIO */
+#define S5PC100_PA_GPIO		(0xE0300000)
+#define S5PC1XX_PA_GPIO		S5PC100_PA_GPIO
+#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
 #define S5PC100_PA_VIC		(0xE4000000)
@@ -40,23 +60,64 @@
 #define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
 
+/* DMA */
+#define S5PC100_PA_MDMA		(0xE8100000)
+#define S5PC100_PA_PDMA0	(0xE9000000)
+#define S5PC100_PA_PDMA1	(0xE9200000)
+
 /* Timer */
 #define S5PC100_PA_TIMER	(0xEA000000)
 #define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
 #define S5PC1XX_VA_TIMER	S3C_VA_TIMER
 
+/* RTC */
+#define S5PC100_PA_RTC		(0xEA300000)
+
 /* UART */
 #define S5PC100_PA_UART		(0xEC000000)
 #define S5PC1XX_PA_UART		S5PC100_PA_UART
 #define S5PC1XX_VA_UART		S3C_VA_UART
 
-/* IIC */
-#define S5PC100_PA_IIC		(0xEC100000)
+/* I2C */
+#define S5PC100_PA_I2C		(0xEC100000)
+#define S5PC100_PA_I2C1		(0xEC200000)
+
+/* USB HS OTG */
+#define S5PC100_PA_USB_HSOTG	(0xED200000)
+#define S5PC100_PA_USB_HSPHY	(0xED300000)
+
+/* SD/MMC */
+#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+#define S5PC100_PA_HSMMC0	S5PC100_PA_HSMMC(0)
+#define S5PC100_PA_HSMMC1	S5PC100_PA_HSMMC(1)
+#define S5PC100_PA_HSMMC2	S5PC100_PA_HSMMC(2)
+
+/* LCD */
+#define S5PC100_PA_FB		(0xEE000000)
+
+/* Multimedia */
+#define S5PC100_PA_G2D		(0xEE800000)
+#define S5PC100_PA_JPEG		(0xEE500000)
+#define S5PC100_PA_ROTATOR	(0xEE100000)
+#define S5PC100_PA_G3D		(0xEF000000)
+
+/* I2S */
+#define S5PC100_PA_I2S0		(0xF2000000)
+#define S5PC100_PA_I2S1		(0xF2100000)
+#define S5PC100_PA_I2S2		(0xF2200000)
+
+/* KEYPAD */
+#define S5PC100_PA_KEYPAD	(0xF3100000)
+
+/* ADC & TouchScreen */
+#define S5PC100_PA_TSADC	(0xF3000000)
 
 /* ETC */
 #define S5PC100_PA_SDRAM	(0x20000000)
+#define S5PC1XX_PA_SDRAM	S5PC100_PA_SDRAM
 
 /* compatibility defines. */
+#define S3C_PA_RTC		S5PC100_PA_RTC
 #define S3C_PA_UART		S5PC100_PA_UART
 #define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
 #define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
@@ -67,9 +128,23 @@
 #define S3C_VA_UART2		(S3C_VA_UART + 0x800)
 #define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
 #define S3C_UART_OFFSET		0x400
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_FB		S5PC100_PA_FB
+#define S3C_PA_G2D		S5PC100_PA_G2D
+#define S3C_PA_G3D		S5PC100_PA_G3D
+#define S3C_PA_JPEG		S5PC100_PA_JPEG
+#define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
 #define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC		S5PC100_PA_IIC
+#define S3C_PA_IIC		S5PC100_PA_I2C
+#define S3C_PA_IIC1		S5PC100_PA_I2C1
+#define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
+#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC0
+#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC1
+#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC2
+#define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define S3C_PA_TSADC		S5PC100_PA_TSADC
 
 #endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
new file mode 100644
index 000000000000..1732cd28c765
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -0,0 +1,139 @@
+/* arch/arm/mach-s5pc100/include/mach/regs-fb.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *   Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Framebuffer register definitions for Samsung S5PC100.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_FB_H
+#define __ASM_ARCH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* VP1 interface timing control */
+#define VP1CON0						(0x118)
+#define VP1_RATECON_EN					(1 << 31)
+#define VP1_CLKRATE_MASK				(0xff)
+
+#define VP1CON1						(0x11c)
+#define VP1_VTREGCON_EN					(1 << 31)
+#define VP1_VBPD_MASK					(0xfff)
+#define VP1_VBPD_SHIFT					(16)
+
+
+#define WPALCON_H					(0x19c)
+#define WPALCON_L					(0x1a0)
+
+/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+ * different for WPAL2-4
+ */
+/* In WPALCON_L (aka WPALCON) */
+#define WPALCON_W1PAL_32BPP_A888			(0x7 << 3)
+#define WPALCON_W0PAL_32BPP_A888			(0x7 << 0)
+
+/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H,
+ * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]).
+ */
+#define WPALCON_L_WxPAL_L_MASK				(0x1)
+#define WPALCON_L_W2PAL_L_SHIFT				(6)
+#define WPALCON_L_W3PAL_L_SHIFT				(7)
+#define WPALCON_L_W4PAL_L_SHIFT				(8)
+
+#define WPALCON_L_WxPAL_H_MASK				(0x3)
+#define WPALCON_H_W2PAL_H_SHIFT				(9)
+#define WPALCON_H_W3PAL_H_SHIFT				(13)
+#define WPALCON_H_W4PAL_H_SHIFT				(17)
+
+/* Per-window alpha value registers */
+/* For window 0 8-bit alpha values are in VIDW0ALPHAx,
+ * for windows 1-4 alpha values consist of two parts, the 4 low bits are
+ * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC,
+ * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0])
+ */
+#define VIDWxALPHA0(_win)				(0x200 + (_win * 8))
+#define VIDWxALPHA1(_win)				(0x204 + (_win * 8))
+
+/* Only for window 0 in VIDW0ALPHAx. */
+#define VIDW0ALPHAx_R(_x)				((_x) << 16)
+#define VIDW0ALPHAx_R_MASK				(0xff << 16)
+#define VIDW0ALPHAx_R_SHIFT				(16)
+#define VIDW0ALPHAx_G(_x)				((_x) << 8)
+#define VIDW0ALPHAx_G_MASK				(0xff << 8)
+#define VIDW0ALPHAx_G_SHIFT				(8)
+#define VIDW0ALPHAx_B(_x)				((_x) << 0)
+#define VIDW0ALPHAx_B_MASK				(0xff << 0)
+#define VIDW0ALPHAx_B_SHIFT				(0)
+
+/* Low 4 bits of alpha0-1 for windows 1-4 */
+#define VIDW14ALPHAx_R_L(_x)				((_x) << 16)
+#define VIDW14ALPHAx_R_L_MASK				(0xf << 16)
+#define VIDW14ALPHAx_R_L_SHIFT				(16)
+#define VIDW14ALPHAx_G_L(_x)				((_x) << 8)
+#define VIDW14ALPHAx_G_L_MASK				(0xf << 8)
+#define VIDW14ALPHAx_G_L_SHIFT				(8)
+#define VIDW14ALPHAx_B_L(_x)				((_x) << 0)
+#define VIDW14ALPHAx_B_L_MASK				(0xf << 0)
+#define VIDW14ALPHAx_B_L_SHIFT				(0)
+
+
+/* Per-window blending equation control registers */
+#define BLENDEQx(_win)					(0x244 + ((_win) * 4))
+#define BLENDEQ1					(0x244)
+#define BLENDEQ2					(0x248)
+#define BLENDEQ3					(0x24c)
+#define BLENDEQ4					(0x250)
+
+#define BLENDEQx_Q_FUNC(_x)				((_x) << 18)
+#define BLENDEQx_Q_FUNC_MASK				(0xf << 18)
+#define BLENDEQx_P_FUNC(_x)				((_x) << 12)
+#define BLENDEQx_P_FUNC_MASK				(0xf << 12)
+#define BLENDEQx_B_FUNC(_x)				((_x) << 6)
+#define BLENDEQx_B_FUNC_MASK				(0xf << 6)
+#define BLENDEQx_A_FUNC(_x)				((_x) << 0)
+#define BLENDEQx_A_FUNC_MASK				(0xf << 0)
+
+#define BLENDCON					(0x260)
+#define BLENDCON_8BIT_ALPHA				(1 << 0)
+
+/* Per-window palette base addresses (start of palette memory).
+ * Each window palette area consists of 256 32-bit entries.
+ * START is the first address (entry 0th), END is the address of 255th entry.
+ */
+#define WIN0_PAL_BASE					(0x2400)
+#define WIN0_PAL_END					(0x27fc)
+#define WIN1_PAL_BASE					(0x2800)
+#define WIN1_PAL_END					(0x2bfc)
+#define WIN2_PAL_BASE					(0x2c00)
+#define WIN2_PAL_END					(0x2ffc)
+#define WIN3_PAL_BASE					(0x3000)
+#define WIN3_PAL_END					(0x33fc)
+#define WIN4_PAL_BASE					(0x3400)
+#define WIN4_PAL_END					(0x37fc)
+
+#define WIN0_PAL(_entry)			(WIN0_PAL_BASE + ((_entry) * 4))
+#define WIN1_PAL(_entry)			(WIN1_PAL_BASE + ((_entry) * 4))
+#define WIN2_PAL(_entry)			(WIN2_PAL_BASE + ((_entry) * 4))
+#define WIN3_PAL(_entry)			(WIN3_PAL_BASE + ((_entry) * 4))
+#define WIN4_PAL(_entry)			(WIN4_PAL_BASE + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	switch (window) {
+	case 0: return WIN0_PAL(reg);
+	case 1: return WIN1_PAL(reg);
+	case 2: return WIN2_PAL(reg);
+	case 3: return WIN3_PAL(reg);
+	case 4: return WIN4_PAL(reg);
+	}
+
+	BUG();
+}
+
+
+#endif /* __ASM_ARCH_REGS_FB_H */
+
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index e39014375470..f0d31a2a598c 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,14 +11,21 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <linux/io.h>
+#include <mach/map.h>
+#include <plat/regs-clock.h>
+
+void (*s5pc1xx_idle)(void);
+
 static void arch_idle(void)
 {
-	/* nothing here yet */
+	if (s5pc1xx_idle)
+		s5pc1xx_idle();
 }
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	__raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
+	return;
 }
-
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 214093cd7632..ae3c52cd0ebb 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -27,16 +27,22 @@
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <video/platform_lcd.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-gpio.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/s5pc100.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -73,9 +79,78 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	},
 };
 
+/* I2C0 */
+static struct i2c_board_info i2c_devs0[] __initdata = {
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c_devs1[] __initdata = {
+};
+
+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	/* backlight */
+	gpio_direction_output(S5PC100_GPD(0), power);
+
+	if (power) {
+		/* module reset */
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(100);
+		gpio_direction_output(S5PC100_GPH0(6), 0);
+		mdelay(10);
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(10);
+	}
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+	.set_power	= smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.refresh	= 70,
+		.pixclock	= (8+13+3+800)*(7+5+1+480),
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+	.win[0]		= &smdkc100_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
+};
+
 static struct map_desc smdkc100_iodesc[] = {};
 
 static struct platform_device *smdkc100_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&smdkc100_lcd_powerdev,
 };
 
 static void __init smdkc100_map_io(void)
@@ -87,12 +162,24 @@ static void __init smdkc100_map_io(void)
 
 static void __init smdkc100_machine_init(void)
 {
+	/* I2C */
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+
+	/* LCD init */
+	gpio_request(S5PC100_GPD(0), "GPD");
+	gpio_request(S5PC100_GPH0(6), "GPH0");
+	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
 	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
 }
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.phys_io	= S5PC100_PA_UART & 0xfff00000,
 	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5PC100_PA_SDRAM + 0x100,
 
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
new file mode 100644
index 000000000000..4385986a3da0
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
+ *
+ * Copyright 2008 Samsung Electronics
+ *
+ * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c6410/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pc100_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	/* [2] = "mmc_bus", not yet succesfuuly used yet */
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+
+void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 8931c5f0e46b..e139a72c2149 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -159,6 +159,12 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+config S5P_GPIO_CFG_S5PC1XX
+	bool
+	help
+	  Internal configuration to enable S5PC1XX style GPIO configuration
+	  functions.
+
 # DMA
 
 config S3C_DMA
@@ -178,6 +184,11 @@ config S3C_DEV_HSMMC1
 	help
 	  Compile in platform device definitions for HSMMC channel 1
 
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
 config S3C_DEV_I2C1
 	bool
 	help
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3c09109e9e84..50444da98425 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_HAVE_PWM)		+= pwm.o
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index 4d01ef1a25dd..619cfa82dcab 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Core clock control support
@@ -337,7 +337,7 @@ int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
 
 	clk_xtal.rate = xtal;
 
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-s3c/dev-hsmmc2.c
new file mode 100644
index 000000000000..824580bc0e06
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc2.c
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * Copyright (c) 2009 Maurus Cuelenaere
+ *
+ * Based on arch/arm/plat-s3c/dev-hsmmc1.c
+ * original file Copyright (c) 2008 Simtec Electronics
+ *
+ * S3C series device definition for hsmmc device 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc2_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC2,
+		.end   = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC2,
+		.end   = IRQ_HSMMC2,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+	.name		= "s3c-sdhci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
+	.resource	= s3c_hsmmc2_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc2_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc2_def_platdata,
+	},
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
index 428372868fbb..4c761529b949 100644
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dev-i2c0.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
index 8349c462788c..d44f79110506 100644
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dev-i2c1.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index 4e5323732434..e771e77dcd54 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -9,8 +9,12 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
 #include <mach/map.h>
 #include <plat/devs.h>
+#include <plat/nand.h>
 
 static struct resource s3c_nand_resource[] = {
 	[0] = {
@@ -28,3 +32,96 @@ struct platform_device s3c_device_nand = {
 };
 
 EXPORT_SYMBOL(s3c_device_nand);
+
+/**
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+	void *ptr;
+	int size;
+
+	size = sizeof(struct mtd_partition) * set->nr_partitions;
+	if (size) {
+		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+		set->partitions = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	size = sizeof(int) * set->nr_chips;
+	if (size) {
+		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+		set->nr_map = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->ecc_layout) {
+		ptr = kmemdup(set->ecc_layout,
+			      sizeof(struct nand_ecclayout), GFP_KERNEL);
+		set->ecc_layout = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+	struct s3c2410_platform_nand *npd;
+	int size;
+	int ret;
+
+	/* note, if we get a failure in allocation, we simply drop out of the
+	 * function. If there is so little memory available at initialisation
+	 * time then there is little chance the system is going to run.
+	 */ 
+
+	npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: failed copying platform data\n", __func__);
+		return;
+	}
+
+	/* now see if we need to copy any of the nand set data */
+
+	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+	if (size) {
+		struct s3c2410_nand_set *from = npd->sets;
+		struct s3c2410_nand_set *to;
+		int i;
+
+		to = kmemdup(from, size, GFP_KERNEL);
+		npd->sets = to;	/* set, even if we failed */
+
+		if (!to) {
+			printk(KERN_ERR "%s: no memory for sets\n", __func__);
+			return;
+		}
+		
+		for (i = 0; i < npd->nr_sets; i++) {
+			ret = s3c_nand_copy_set(to);
+			if (!ret) {
+				printk(KERN_ERR "%s: failed to copy set %d\n",
+				__func__, i);
+				return;
+			}
+			to++;
+		}
+	}
+}
+
+EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
index c9db75c06af5..a995850cd9d5 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-s3c/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dma.c
  *
- * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
index 0f440b9168db..53a93656d5db 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -33,5 +33,5 @@ struct s3c24xx_audio_simtec_pdata {
 	void	(*startup)(void);
 };
 
-extern int simtec_audio_add(const char *codec_name,
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
 			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 7b982b7f28cd..94eb06a2ea5c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index fbc3d498e02e..d1131ca11e97 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -12,6 +12,9 @@
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
 
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
@@ -73,3 +76,6 @@ extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
 
+extern void (*s5pc1xx_idle)(void);
+
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
index 34dba98f08e1..e429d10be3ad 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C DMA support
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
index 214ff561b0dd..f8db87930f8b 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-s3c/include/plat/fb.h
@@ -70,4 +70,11 @@ extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
  */
 extern void s3c64xx_fb_gpio_setup_24bpp(void);
 
+/**
+ * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pc100_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 67450f115748..3083df00dee6 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/iic.h
  *
- * Copyright 2004,2009 Simtec Electronics
+ * Copyright 2004-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C - I2C Controller platform_device info
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 18f958801e64..065985978413 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -55,3 +55,11 @@ struct s3c2410_platform_nand {
 					       int chip);
 };
 
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
new file mode 100644
index 000000000000..a60ed0d06c94
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
@@ -0,0 +1,235 @@
+/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN	(1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0				(0x10)
+#define VIDTCON1				(0x14)
+#define VIDTCON2				(0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
+
+
+#define VIDINTCON0				(0x130)
+
+#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
+#define WINCONx_YCbCr				(1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
+#define WINCON2_BLD_PIX				(1 << 6)
+
+#define WINCON2_ALPHA_SEL			(1 << 1)
+#define WINCON2_BPPMODE_MASK			(0xf << 2)
+#define WINCON2_BPPMODE_SHIFT			(2)
+#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define WINCON3_BLD_PIX				(1 << 6)
+
+#define WINCON3_ALPHA_SEL			(1 << 1)
+#define WINCON3_BPPMODE_MASK			(0xf << 2)
+#define WINCON3_BPPMODE_SHIFT			(2)
+#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
+
+#define DITHMODE				(0x170)
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+
+#define DITHMODE_DITH_EN			(1 << 0)
+
+#define WPALCON					(0x1A0)
+
+/* Palette control */
+/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
+ * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+	if (win < 2)
+		return 256;
+	if (win < 4)
+		return 16;
+	if (win == 4)
+		return 4;
+
+	BUG();	/* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+	/* all windows can do 1/2 bpp */
+
+	if ((bpp == 25 || bpp == 19) && win == 0)
+		return 0;	/* win 0 does not have 19 or 25bpp modes */
+
+	if (bpp == 4 && win == 4)
+		return 0;
+
+	if (bpp == 8 && (win >= 3))
+		return 0;	/* win 3/4 cannot do 8bpp in any mode */
+
+	return 1;
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+	return window > 1;
+}
+
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+				       struct s3c_fb_palette *palette)
+{
+	if (window < 2) {
+		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
+		palette->r.offset = 16;
+		palette->r.length = 8;
+		palette->g.offset = 8;
+		palette->g.length = 8;
+		palette->b.offset = 0;
+		palette->b.length = 8;
+	} else {
+		/* currently we assume RGB 5/6/5 */
+		palette->r.offset = 11;
+		palette->r.length = 5;
+		palette->g.offset = 5;
+		palette->g.length = 6;
+		palette->b.offset = 0;
+		palette->b.length = 5;
+	}
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value	Win0	 Win1	  Win2	   Win3	    Win 4
+ * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
+ * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
+ * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
+ * 0011		8(P)	 8(P)     -none-   -none-   -none-
+ * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
+ * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
+ * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
+ * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
+ * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110		-none-	 -none-	  -none-   -none-    -none-
+ * 1111		-none-	 -none-   -none-   -none-    -none-
+*/
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h
index b2caa4bca270..238efea7b9e4 100644
--- a/arch/arm/plat-s3c/include/plat/regs-nand.h
+++ b/arch/arm/plat-s3c/include/plat/regs-nand.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
- * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 66af75a5cdd1..85d8904e7f24 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -6,7 +6,7 @@
  *
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *
- *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
  *
  *  Adapted from:
  *
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index f615308ccdfb..53198673b6bd 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -57,6 +57,7 @@ struct s3c_sdhci_platdata {
  */
 extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
 
 /* Default platform data, exported so that per-cpu initialisation can
  * set the correct one when there are more than one cpu type selected.
@@ -64,11 +65,16 @@ extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
 
 extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
 
 /* Helper function availablity */
 
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
@@ -103,6 +109,17 @@ static inline void s3c6400_default_sdhci1(void)
 static inline void s3c6400_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6400_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
@@ -140,9 +157,70 @@ static inline void s3c6410_default_sdhci1(void)
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6410_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C6410_SETUP_SDHCI */
 
+/* S5PC100 SDHCI setup */
+
+#ifdef CONFIG_S5PC100_SETUP_SDHCI
+extern char *s5pc100_hsmmc_clksrcs[4];
+
+extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pc100_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pc100_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pc100_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pc100_default_sdhci1(void) { }
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index 39f2555564da..8eb1f439861c 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm-check.c
  *  originally in linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 8d97db2c7a0d..767470601e5c 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm.c
  *
  * Copyright 2008 Openmoko, Inc.
- * Copyright 2004,2006,2008 Simtec Electronics
+ * Copyright 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c7aca489643..20fbf936bb93 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -178,4 +178,11 @@ config MACH_SMDK
 	help
 	  Common machine code for SMDK2410 and SMDK2440
 
+config S3C24XX_SIMTEC_AUDIO
+	bool
+	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+	default y
+	help
+	  Add audio devices for common Simtec S3C24XX boards
+
 endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 7780d2dd833a..5dee8c12e8b4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 # machine common support
 
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 0afb217a775e..ac061a1bcb37 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock-dclk.c
  *
- * Copyright (c) 2004,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index aa119863c5ce..9e0e20ad2e46 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -198,7 +198,7 @@ void __init smdk_machine_init(void)
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
 
-	s3c_device_nand.dev.platform_data = &smdk_nand_info;
+	s3c_nand_set_platdata(&smdk_nand_info);
 
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 4f1b789a1173..2d42efb9f4e9 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/cpu-freq.c
  *
- * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f046f8c51084..f65192d5b1d7 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/dma.c
  *
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 DMA core
@@ -1310,7 +1310,7 @@ int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
 	int channel;
 	int ret;
 
-	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+	printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
 
 	dma_channels = channels;
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index c776120b99e6..33d421d78bad 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index c2cef6139683..36aaa10fad06 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -1,6 +1,31 @@
 #ifndef _ARCH_MCI_H
 #define _ARCH_MCI_H
 
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
 struct s3c24xx_mci_pdata {
 	unsigned int	no_wprotect : 1;
 	unsigned int	no_detect : 1;
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
index 3bc0a216df97..1b0f4c36d384 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index b7acf1a8ecd2..ea8dea3339a4 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq-om.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index d02f5f02045e..ef0f521437d7 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics 
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index da0d3217d3e3..663b280d65da 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm-simtec.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://armlinux.simtec.co.uk/
@@ -35,7 +35,7 @@
 
 #include <plat/pm.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
 
 /* pm_simtec_init
  *
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 56e5253ca02c..3620dd299095 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Power Manager (Suspend-To-RAM) support
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index d0a3a145cd4d..963fb0b4379e 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index fd45e47facbc..24993dce10b5 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index ae2e6c604f27..976002fb1b8f 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
index ff9443b233aa..49f65032f2c0 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index dde41f171aff..79371091aa38 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
  *
- * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 0902afd227ca..a75c0c2431ea 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c
new file mode 100644
index 000000000000..6bc832e0d8ea
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/simtec-audio.c
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c24xx/simtec-audio.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Audio setup for various Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/audio-simtec.h>
+#include <plat/devs.h>
+
+/* platform ops for audio */
+
+static void simtec_audio_startup_lrroute(void)
+{
+	unsigned int tmp;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tmp = __raw_readb(BAST_VA_CTRL1);
+	tmp &= ~BAST_CPLD_CTRL1_LRMASK;
+	tmp |= BAST_CPLD_CTRL1_LRCDAC;
+	__raw_writeb(tmp, BAST_VA_CTRL1);
+
+	local_irq_restore(flags);
+}
+
+static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
+static char our_name[32];
+
+static struct platform_device simtec_audio_dev = {
+	.name	= our_name,
+	.id	= -1,
+	.dev	= {
+		.parent		= &s3c_device_iis.dev,
+		.platform_data	= &simtec_audio_platdata,
+	},
+};
+
+int __init simtec_audio_add(const char *name, bool has_lr_routing,
+			    struct s3c24xx_audio_simtec_pdata *spd)
+{
+	if (!name)
+		name = "tlv320aic23";
+
+	snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
+
+	/* copy platform data so the source can be __initdata */
+	if (spd)
+		simtec_audio_platdata = *spd;
+
+	if (has_lr_routing)
+		simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+
+	platform_device_register(&s3c_device_iis);
+	platform_device_register(&simtec_audio_dev);
+	return 0;
+}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index b1fdd83940a6..49796d2db86d 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -107,6 +107,11 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c
index e6e0843215df..74c0e8347de5 100644
--- a/arch/arm/plat-s3c64xx/cpufreq.c
+++ b/arch/arm/plat-s3c64xx/cpufreq.c
@@ -19,6 +19,7 @@
 
 static struct clk *armclk;
 static struct regulator *vddarm;
+static unsigned long regulator_latency;
 
 #ifdef CONFIG_CPU_S3C6410
 struct s3c64xx_dvfs {
@@ -27,11 +28,10 @@ struct s3c64xx_dvfs {
 };
 
 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
-	[0] = { 1000000, 1000000 },
-	[1] = { 1000000, 1050000 },
-	[2] = { 1050000, 1100000 },
-	[3] = { 1050000, 1150000 },
-	[4] = { 1250000, 1350000 },
+	[0] = { 1000000, 1150000 },
+	[1] = { 1050000, 1150000 },
+	[2] = { 1100000, 1150000 },
+	[3] = { 1200000, 1350000 },
 };
 
 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
@@ -41,9 +41,9 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 	{ 1, 266000 },
 	{ 2, 333000 },
 	{ 2, 400000 },
-	{ 3, 532000 },
-	{ 3, 533000 },
-	{ 4, 667000 },
+	{ 2, 532000 },
+	{ 2, 533000 },
+	{ 3, 667000 },
 	{ 0, CPUFREQ_TABLE_END },
 };
 #endif
@@ -141,7 +141,7 @@ err:
 }
 
 #ifdef CONFIG_REGULATOR
-static void __init s3c64xx_cpufreq_constrain_voltages(void)
+static void __init s3c64xx_cpufreq_config_regulator(void)
 {
 	int count, v, i, found;
 	struct cpufreq_frequency_table *freq;
@@ -150,11 +150,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void)
 	count = regulator_count_voltages(vddarm);
 	if (count < 0) {
 		pr_err("cpufreq: Unable to check supported voltages\n");
-		return;
 	}
 
 	freq = s3c64xx_freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
+	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 			continue;
 
@@ -175,6 +174,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void)
 
 		freq++;
 	}
+
+	/* Guess based on having to do an I2C/SPI write; in future we
+	 * will be able to query the regulator performance here. */
+	regulator_latency = 1 * 1000 * 1000;
 }
 #endif
 
@@ -206,7 +209,7 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 		pr_err("cpufreq: Only frequency scaling available\n");
 		vddarm = NULL;
 	} else {
-		s3c64xx_cpufreq_constrain_voltages();
+		s3c64xx_cpufreq_config_regulator();
 	}
 #endif
 
@@ -217,8 +220,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 		/* Check for frequencies we can generate */
 		r = clk_round_rate(armclk, freq->frequency * 1000);
 		r /= 1000;
-		if (r != freq->frequency)
+		if (r != freq->frequency) {
+			pr_debug("cpufreq: %dkHz unsupported by clock\n",
+				 freq->frequency);
 			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
 
 		/* If we have no regulator then assume startup
 		 * frequency is the maximum we can support. */
@@ -230,9 +236,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 
 	policy->cur = clk_get_rate(armclk) / 1000;
 
-	/* Pick a conservative guess in ns: we'll need ~1 I2C/SPI
-	 * write plus clock reprogramming. */
-	policy->cpuinfo.transition_latency = 2 * 1000 * 1000;
+	/* Datasheet says PLL stabalisation time (if we were to use
+	 * the PLLs, which we don't currently) is ~300us worst case,
+	 * but add some fudge.
+	 */
+	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
 	if (ret != 0) {
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 92859290ea33..778560457277 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -213,6 +213,11 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
 static struct s3c_gpio_chip gpio_4bit[] = {
 	{
 		.base	= S3C64XX_GPA_BASE,
@@ -269,10 +274,16 @@ static struct s3c_gpio_chip gpio_4bit[] = {
 			.base	= S3C64XX_GPM(0),
 			.ngpio	= S3C64XX_GPIO_M_NR,
 			.label	= "GPM",
+			.to_irq = s3c64xx_gpio2int_gpm,
 		},
 	},
 };
 
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
 static struct s3c_gpio_chip gpio_4bit2[] = {
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
@@ -297,6 +308,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = {
 			.base	= S3C64XX_GPL(0),
 			.ngpio	= S3C64XX_GPIO_L_NR,
 			.label	= "GPL",
+			.to_irq = s3c64xx_gpio2int_gpl,
 		},
 	},
 };
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
index c47daf7e2723..e22b49f4f982 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
@@ -36,18 +36,18 @@
 
 #define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
 #define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
-#define S3C64XX_GPC4_I2S0_V40_DO	(0x05 << 16)
+#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
 #define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
 
 #define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
 #define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
-#define S3C64XX_GPC5_I2S1_V40_DO	(0x05 << 20)
+#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
 #define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
 
 #define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
 #define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
 
 #define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
-#define S3C64XX_GPC7_I2S2_V40_DO	(0x05 << 28)
+#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
 #define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index f81b7b818ba0..ebdf183a0911 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -65,7 +65,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
 static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
 	int offs = eint_offset(irq);
-	int pin;
+	int pin, pin_val;
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -109,7 +109,10 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 		return -1;
 	}
 
-	shift = (offs / 2) * 4;
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
 	mask = 0x7 << shift;
 
 	ctrl = __raw_readl(reg);
@@ -119,12 +122,18 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 
 	/* set the GPIO pin appropriately */
 
-	if (offs < 23)
+	if (offs < 16) {
 		pin = S3C64XX_GPN(offs);
-	else
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
 		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
 
-	s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgpin(pin, pin_val);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
index 5417123b0ac1..a58c0cc7ba5e 100644
--- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -53,3 +53,23 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
 }
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(6 + width);
+
+	/* Set all the necessary GPH pins to special-function 1 */
+	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPC pins to special-function 1 */
+	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index a8a711c3c064..1608e62b0c9d 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -15,6 +15,9 @@ config PLAT_S5PC1XX
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK
 	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	select S5P_GPIO_CFG_S5PC1XX
 	help
 	  Base platform code for any Samsung S5PC1XX device
 
@@ -34,7 +37,12 @@ config CPU_S5PC100_CLOCK
 
 # platform specific device setup
 
-config S5PC100_SETUP_I2C0
+config S5PC1XX_SETUP_FB_24BPP
+	bool
+	help
+          Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC1XX_SETUP_I2C0
 	bool
 	default y
 	help
@@ -43,8 +51,14 @@ config S5PC100_SETUP_I2C0
 	  Note, currently since i2c0 is always compiled, this setup helper
 	  is always compiled with it.
 
-config S5PC100_SETUP_I2C1
+config S5PC1XX_SETUP_I2C1
 	bool
 	help
 	  Common setup code for i2c bus 1.
+
+config S5PC1XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
 endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index f1ecb2c37ee2..278f26806089 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -13,7 +13,9 @@ obj-				:=
 
 obj-y				+= dev-uart.o
 obj-y				+= cpu.o
-obj-y				+= irq.o
+obj-y				+= irq.o irq-gpio.o irq-eint.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
 
 # CPU support
 
@@ -22,5 +24,8 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
 
 # Device setup
 
-obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
+obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
new file mode 100644
index 000000000000..26c21d849790
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -0,0 +1,728 @@
+/* linux/arch/arm/plat-s5pc1xx/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * S5PC1XX Base clock support
+ *
+ * Based on plat-s3c64xx/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5PC100_CLKSRC1);
+	if (enable)
+		val |= S5PC100_CLKSRC1_CLK48M_MASK;
+	else
+		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+	__raw_writel(val, S5PC100_CLKSRC1);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+	.name		= "clk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
+static int clk_dummy_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+struct clk clk_hd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+	.enable		= clk_dummy_enable,
+};
+
+struct clk clk_pd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+	.enable		= clk_dummy_enable,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk s5pc100_init_clocks_disable[] = {
+	{
+		.name		= "dsi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
+	}, {
+		.name		= "csi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
+	}, {
+		.name		= "ccan",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
+	}, {
+		.name		= "ccan",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "hclkd2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
+	}, {
+		.name		= "iis-d2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
+	},
+};
+
+static struct clk s5pc100_init_clocks[] = {
+	/* System1 (D0_0) devices */
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
+	}, {
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
+	}, {
+		.name		= "cf-ata",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
+	}, {
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
+	},
+
+	/* Memory (D0_1) devices */
+	{
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
+	}, {
+		.name		= "onenand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
+	},
+
+	/* System2 (D0_2) devices */
+	{
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_pd0,
+		.enable		= s5pc100_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
+	},
+
+	/* File (D1_0) devices */
+	{
+		.name		= "pdma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
+	}, {
+		.name		= "modem",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
+	},
+
+	/* Multimedia1 (D1_1) devices */
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
+	}, {
+		.name		= "g3d",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
+	},
+
+	/* Multimedia2 (D1_2) devices */
+	{
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
+	},
+
+	/* System (D1_3) devices */
+	{
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
+	},
+
+	/* Connectivity (D1_4) devices */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
+	}, {
+		.name		= "hdmi-i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
+	},
+
+	/* Audio (D1_5) devices */
+	{
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
+	}, {
+		.name		= "cg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
+	},
+
+	/* Audio (D2_0) devices: all disabled */
+
+	/* Special Clocks 0 */
+	{
+		.name		= "sclk_hpm",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_HPM,
+	}, {
+		.name		= "sclk_onenand",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
+	}, {
+		.name		= "spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
+	}, {
+		.name		= "spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
+	}, {
+		.name		= "spi_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
+	},
+	/* Special Clocks 1 */
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_54m,
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+	int size;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	clkp = s5pc100_init_clocks;
+	size = ARRAY_SIZE(s5pc100_init_clocks);
+
+	for (ptr = 0; ptr < size; ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = s5pc100_init_clocks_disable;
+	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
+
+	for (ptr = 0; ptr < size; ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
index 715a7330794d..02baeaa2a121 100644
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -55,6 +55,16 @@ static struct cpu_table cpu_ids[] __initdata = {
 
 static struct map_desc s5pc1xx_iodesc[] __initdata = {
 	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK_OTHER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
 		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
 		.length		= SZ_16,
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
new file mode 100644
index 000000000000..bba675df9c75
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * S5PC1XX GPIO Configuration.
+ *
+ * Based on plat-s3c64xx/gpio-config.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	void __iomem *reg;
+	int shift = off * 2;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = 0xffff & (0x3 << shift);
+	drvstr = drvstr >> shift;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+			s5p_gpio_drvstr_t drvstr)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	void __iomem *reg;
+	int shift = off * 2;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
new file mode 100644
index 000000000000..facb410e7a71
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -0,0 +1,503 @@
+/*
+ * arch/arm/plat-s5pc1xx/gpiolib.c
+ *
+ *  Copyright 2009 Samsung Electronics Co
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC1XX - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+#define OFF_GPCON	(0x00)
+#define OFF_GPDAT	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The s5pc1xx_gpiolib routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *	        gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+ */
+
+static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + OFF_GPCON);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + OFF_GPDAT);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + OFF_GPDAT);
+	__raw_writel(con, base + OFF_GPCON);
+	__raw_writel(dat, base + OFF_GPDAT);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	return S3C_IRQ_GPIO(chip->base + offset);
+}
+
+static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+{
+	int base;
+
+	base = chip->base - S5PC100_GPH0(0);
+	if (base == 0)
+		return IRQ_EINT(offset);
+	base = chip->base - S5PC100_GPH1(0);
+	if (base == 0)
+		return IRQ_EINT(8 + offset);
+	base = chip->base - S5PC100_GPH2(0);
+	if (base == 0)
+		return IRQ_EINT(16 + offset);
+	base = chip->base - S5PC100_GPH3(0);
+	if (base == 0)
+		return IRQ_EINT(24 + offset);
+	return -EINVAL;
+}
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+	.cfg_eint	= 0xf,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+	{
+		.base	= S5PC100_GPA0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.base	= S5PC100_GPA1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.base	= S5PC100_GPB_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5PC100_GPC_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5PC100_GPD_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5PC100_GPE0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.base	= S5PC100_GPE1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.base	= S5PC100_GPF0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.base	= S5PC100_GPF1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.base	= S5PC100_GPF2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.base	= S5PC100_GPF3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.base	= S5PC100_GPG0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.base	= S5PC100_GPG1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.base	= S5PC100_GPG2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.base	= S5PC100_GPG3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.base	= S5PC100_GPH0_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.base	= S5PC100_GPH1_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+		},
+	}, {
+		.base	= S5PC100_GPH2_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+		},
+	}, {
+		.base	= S5PC100_GPH3_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+		},
+	}, {
+		.base	= S5PC100_GPI_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5PC100_GPJ0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.base	= S5PC100_GPJ1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.base	= S5PC100_GPJ2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.base	= S5PC100_GPJ3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.base	= S5PC100_GPJ4_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.base	= S5PC100_GPK0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.base	= S5PC100_GPK1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.base	= S5PC100_GPK2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.base	= S5PC100_GPK3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.base	= S5PC100_GPL0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.base	= S5PC100_GPL1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.base	= S5PC100_GPL2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.base	= S5PC100_GPL3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.base	= S5PC100_GPL4_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	},
+};
+
+/* FIXME move from irq-gpio.c */
+extern struct irq_chip s5pc1xx_gpioint;
+extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+
+static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = s5pc1xx_gpiolib_input;
+	chip->chip.direction_output = s5pc1xx_gpiolib_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+
+	/* Interrupt */
+	if (chip->config == &gpio_cfg) {
+		int i, irq;
+
+		chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
+
+		for (i = 0;  i < chip->chip.ngpio; i++) {
+			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
+			set_irq_chip(irq, &s5pc1xx_gpioint);
+			set_irq_data(irq, &chip->chip);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+	} else if (chip->config == &gpio_cfg_eint)
+		chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
+}
+
+static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
+				       int nr_chips,
+				       void (*fn)(struct s3c_gpio_chip *))
+{
+	for (; nr_chips > 0; nr_chips--, chips++) {
+		if (fn)
+			(fn)(chips);
+		s3c_gpiolib_add(chips);
+	}
+}
+
+static __init int s5pc1xx_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chips;
+	int nr_chips;
+
+		chips = s5pc100_gpio_chips;
+		nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+	s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
+	/* Interrupt */
+	set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
+
+	return 0;
+}
+core_initcall(s5pc1xx_gpiolib_init);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
new file mode 100644
index 000000000000..72ad59f61efc
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
+ *
+ * Copyright 2009 Samsung Electronic
+ *
+ * S5PC1XX Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+#ifndef __GPIO_CFG_S5PC1XX_H
+#define __GPIO_CFG_S5PC1XX_H __FILE__
+
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
+
+#define S5P_GPIO_DRVSTR_LV1	0x00
+#define S5P_GPIO_DRVSTR_LV2	0x01
+#define S5P_GPIO_DRVSTR_LV3	0x10
+#define S5P_GPIO_DRVSTR_LV4	0x11
+
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
+
+extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+			s5p_gpio_drvstr_t drvstr);
+
+#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
new file mode 100644
index 000000000000..33ad267e8477
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * External Interrupt (GPH0 ~ GPH3) control register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PC1XX_WKUP_INT_CON0_7		(S5PC1XX_EINT_BASE + 0x0)
+#define S5PC1XX_WKUP_INT_CON8_15	(S5PC1XX_EINT_BASE + 0x4)
+#define S5PC1XX_WKUP_INT_CON16_23	(S5PC1XX_EINT_BASE + 0x8)
+#define S5PC1XX_WKUP_INT_CON24_31	(S5PC1XX_EINT_BASE + 0xC)
+#define S5PC1XX_WKUP_INT_CON(x)		(S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_FLTCON0_3	(S5PC1XX_EINT_BASE + 0x80)
+#define S5PC1XX_WKUP_INT_FLTCON4_7	(S5PC1XX_EINT_BASE + 0x84)
+#define S5PC1XX_WKUP_INT_FLTCON8_11	(S5PC1XX_EINT_BASE + 0x88)
+#define S5PC1XX_WKUP_INT_FLTCON12_15	(S5PC1XX_EINT_BASE + 0x8C)
+#define S5PC1XX_WKUP_INT_FLTCON16_19	(S5PC1XX_EINT_BASE + 0x90)
+#define S5PC1XX_WKUP_INT_FLTCON20_23	(S5PC1XX_EINT_BASE + 0x94)
+#define S5PC1XX_WKUP_INT_FLTCON24_27	(S5PC1XX_EINT_BASE + 0x98)
+#define S5PC1XX_WKUP_INT_FLTCON28_31	(S5PC1XX_EINT_BASE + 0x9C)
+#define S5PC1XX_WKUP_INT_FLTCON(x)	(S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_MASK0_7	(S5PC1XX_EINT_BASE + 0x100)
+#define S5PC1XX_WKUP_INT_MASK8_15	(S5PC1XX_EINT_BASE + 0x104)
+#define S5PC1XX_WKUP_INT_MASK16_23	(S5PC1XX_EINT_BASE + 0x108)
+#define S5PC1XX_WKUP_INT_MASK24_31	(S5PC1XX_EINT_BASE + 0x10C)
+#define S5PC1XX_WKUP_INT_MASK(x)	(S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_PEND0_7	(S5PC1XX_EINT_BASE + 0x140)
+#define S5PC1XX_WKUP_INT_PEND8_15	(S5PC1XX_EINT_BASE + 0x144)
+#define S5PC1XX_WKUP_INT_PEND16_23	(S5PC1XX_EINT_BASE + 0x148)
+#define S5PC1XX_WKUP_INT_PEND24_31	(S5PC1XX_EINT_BASE + 0x14C)
+#define S5PC1XX_WKUP_INT_PEND(x)	(S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_LOWLEV		(0x00)
+#define S5PC1XX_WKUP_INT_HILEV		(0x01)
+#define S5PC1XX_WKUP_INT_FALLEDGE	(0x02)
+#define S5PC1XX_WKUP_INT_RISEEDGE	(0x03)
+#define S5PC1XX_WKUP_INT_BOTHEDGE	(0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index f07d8c3b25d6..ef8736366f0d 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -171,12 +171,21 @@
 #define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
 #define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
 
+/* External interrupt */
 #define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
 
-#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S3C_EINT(x)
+#define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
+#define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
+#define IRQ_EINT_BIT(x)		(x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
 
-#define NR_IRQS 		(IRQ_EINT(31)+1)
+/* GPIO interrupt */
+#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+
+/*
+ * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
+ */
+#define NR_IRQS			(S3C_IRQ_GPIO(320) + 1)
 
 #endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
 
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index 75c8390cb827..c5cc86e92d65 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -13,68 +13,69 @@
 #ifndef __PLAT_REGS_CLOCK_H
 #define __PLAT_REGS_CLOCK_H __FILE__
 
-#define S5PC1XX_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG_OTHER(x)		(S5PC1XX_VA_CLK_OTHER + (x))
 
-#define S5PC1XX_APLL_LOCK		S5PC1XX_CLKREG(0x00)
-#define S5PC1XX_MPLL_LOCK		S5PC1XX_CLKREG(0x04)
-#define S5PC1XX_EPLL_LOCK		S5PC1XX_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK		S5PC1XX_CLKREG(0x0C)
+/* s5pc100 register for clock */
+#define S5PC100_APLL_LOCK		S5PC100_CLKREG(0x00)
+#define S5PC100_MPLL_LOCK		S5PC100_CLKREG(0x04)
+#define S5PC100_EPLL_LOCK		S5PC100_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK		S5PC100_CLKREG(0x0C)
 
-#define S5PC1XX_APLL_CON		S5PC1XX_CLKREG(0x100)
-#define S5PC1XX_MPLL_CON		S5PC1XX_CLKREG(0x104)
-#define S5PC1XX_EPLL_CON		S5PC1XX_CLKREG(0x108)
-#define S5PC100_HPLL_CON		S5PC1XX_CLKREG(0x10C)
+#define S5PC100_APLL_CON		S5PC100_CLKREG(0x100)
+#define S5PC100_MPLL_CON		S5PC100_CLKREG(0x104)
+#define S5PC100_EPLL_CON		S5PC100_CLKREG(0x108)
+#define S5PC100_HPLL_CON		S5PC100_CLKREG(0x10C)
 
-#define S5PC1XX_CLK_SRC0		S5PC1XX_CLKREG(0x200)
-#define S5PC1XX_CLK_SRC1		S5PC1XX_CLKREG(0x204)
-#define S5PC1XX_CLK_SRC2		S5PC1XX_CLKREG(0x208)
-#define S5PC1XX_CLK_SRC3		S5PC1XX_CLKREG(0x20C)
+#define S5PC100_CLKSRC0			S5PC100_CLKREG(0x200)
+#define S5PC100_CLKSRC1			S5PC100_CLKREG(0x204)
+#define S5PC100_CLKSRC2			S5PC100_CLKREG(0x208)
+#define S5PC100_CLKSRC3			S5PC100_CLKREG(0x20C)
 
-#define S5PC1XX_CLK_DIV0		S5PC1XX_CLKREG(0x300)
-#define S5PC1XX_CLK_DIV1		S5PC1XX_CLKREG(0x304)
-#define S5PC1XX_CLK_DIV2		S5PC1XX_CLKREG(0x308)
-#define S5PC1XX_CLK_DIV3		S5PC1XX_CLKREG(0x30C)
-#define S5PC1XX_CLK_DIV4		S5PC1XX_CLKREG(0x310)
+#define S5PC100_CLKDIV0			S5PC100_CLKREG(0x300)
+#define S5PC100_CLKDIV1			S5PC100_CLKREG(0x304)
+#define S5PC100_CLKDIV2			S5PC100_CLKREG(0x308)
+#define S5PC100_CLKDIV3			S5PC100_CLKREG(0x30C)
+#define S5PC100_CLKDIV4			S5PC100_CLKREG(0x310)
 
-#define S5PC100_CLK_OUT			S5PC1XX_CLKREG(0x400)
+#define S5PC100_CLK_OUT			S5PC100_CLKREG(0x400)
 
-#define S5PC100_CLKGATE_D00		S5PC1XX_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01		S5PC1XX_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02		S5PC1XX_CLKREG(0x508)
+#define S5PC100_CLKGATE_D00		S5PC100_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01		S5PC100_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02		S5PC100_CLKREG(0x508)
 
-#define S5PC100_CLKGATE_D10		S5PC1XX_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11		S5PC1XX_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12		S5PC1XX_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13		S5PC1XX_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14		S5PC1XX_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15		S5PC1XX_CLKREG(0x534)
+#define S5PC100_CLKGATE_D10		S5PC100_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11		S5PC100_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12		S5PC100_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13		S5PC100_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14		S5PC100_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15		S5PC100_CLKREG(0x534)
 
-#define S5PC100_CLKGATE_D20		S5PC1XX_CLKREG(0x540)
+#define S5PC100_CLKGATE_D20		S5PC100_CLKREG(0x540)
 
-#define S5PC100_SCLKGATE0		S5PC1XX_CLKREG(0x560)
-#define S5PC100_SCLKGATE1		S5PC1XX_CLKREG(0x564)
+#define S5PC100_SCLKGATE0		S5PC100_CLKREG(0x560)
+#define S5PC100_SCLKGATE1		S5PC100_CLKREG(0x564)
 
-#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
-
-#define S5PC1XX_EPLL_EN     (1<<31)
-#define S5PC1XX_EPLL_MASK   0xffffffff
-#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+/* EPLL_CON */
+#define S5PC100_EPLL_EN			(1<<31)
+#define S5PC100_EPLL_MASK		0xffffffff
+#define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
 
 /* CLKSRC0 */
-#define S5PC1XX_CLKSRC0_APLL_MASK		(0x1<<0)
-#define S5PC1XX_CLKSRC0_APLL_SHIFT		(0)
-#define S5PC1XX_CLKSRC0_MPLL_MASK		(0x1<<4)
-#define S5PC1XX_CLKSRC0_MPLL_SHIFT		(4)
-#define S5PC1XX_CLKSRC0_EPLL_MASK		(0x1<<8)
-#define S5PC1XX_CLKSRC0_EPLL_SHIFT		(8)
+#define S5PC100_CLKSRC0_APLL_MASK		(0x1<<0)
+#define S5PC100_CLKSRC0_APLL_SHIFT		(0)
+#define S5PC100_CLKSRC0_MPLL_MASK		(0x1<<4)
+#define S5PC100_CLKSRC0_MPLL_SHIFT		(4)
+#define S5PC100_CLKSRC0_EPLL_MASK		(0x1<<8)
+#define S5PC100_CLKSRC0_EPLL_SHIFT		(8)
 #define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
 #define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
 #define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
 #define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
 #define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
 #define S5PC100_CLKSRC0_HREF_SHIFT		(20)
-#define S5PC1XX_CLKSRC0_ONENAND_MASK	(0x1<<24)
-#define S5PC1XX_CLKSRC0_ONENAND_SHIFT	(24)
+#define S5PC100_CLKSRC0_ONENAND_MASK	(0x1<<24)
+#define S5PC100_CLKSRC0_ONENAND_SHIFT	(24)
 
 
 /* CLKSRC1 */
@@ -127,10 +128,9 @@
 #define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
 #define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
 
-
 /* CLKDIV0 */
-#define S5PC1XX_CLKDIV0_APLL_MASK		(0x1<<0)
-#define S5PC1XX_CLKDIV0_APLL_SHIFT		(0)
+#define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
+#define S5PC100_CLKDIV0_APLL_SHIFT		(0)
 #define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
 #define S5PC100_CLKDIV0_ARM_SHIFT		(4)
 #define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
@@ -141,8 +141,8 @@
 #define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
 
 /* CLKDIV1 */
-#define S5PC100_CLKDIV1_AM_MASK		(0x7<<0)
-#define S5PC100_CLKDIV1_AM_SHIFT		(0)
+#define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
+#define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
 #define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
 #define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
 #define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
@@ -202,7 +202,6 @@
 #define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
 #define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
 
-
 /* HCLKD0/PCLKD0 Clock Gate 0 Registers */
 #define S5PC100_CLKGATE_D00_INTC		(1<<0)
 #define S5PC100_CLKGATE_D00_TZIC		(1<<1)
@@ -295,8 +294,8 @@
 #define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
 
 /* Special Clock Gate 0 Registers */
-#define	S5PC1XX_CLKGATE_SCLK0_HPM		(1<<0)
-#define	S5PC1XX_CLKGATE_SCLK0_PWI		(1<<1)
+#define	S5PC100_CLKGATE_SCLK0_HPM		(1<<0)
+#define	S5PC100_CLKGATE_SCLK0_PWI		(1<<1)
 #define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
 #define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
 #define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
@@ -329,89 +328,28 @@
 #define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
 #define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
 
-/* register for power management */
-#define S5PC100_PWR_CFG 		S5PC1XX_CLKREG(0x8000)
-#define S5PC100_EINT_WAKEUP_MASK 	S5PC1XX_CLKREG(0x8004)
-#define S5PC100_NORMAL_CFG 		S5PC1XX_CLKREG(0x8010)
-#define S5PC100_STOP_CFG 		S5PC1XX_CLKREG(0x8014)
-#define S5PC100_SLEEP_CFG 		S5PC1XX_CLKREG(0x8018)
-#define S5PC100_STOP_MEM_CFG 	S5PC1XX_CLKREG(0x801C)
-#define S5PC100_OSC_FREQ 		S5PC1XX_CLKREG(0x8100)
-#define S5PC100_OSC_STABLE 		S5PC1XX_CLKREG(0x8104)
-#define S5PC100_PWR_STABLE 		S5PC1XX_CLKREG(0x8108)
-#define S5PC100_MTC_STABLE 		S5PC1XX_CLKREG(0x8110)
-#define S5PC100_CLAMP_STABLE 	S5PC1XX_CLKREG(0x8114)
-#define S5PC100_OTHERS 		S5PC1XX_CLKREG(0x8200)
-#define S5PC100_RST_STAT 		S5PC1XX_CLKREG(0x8300)
-#define S5PC100_WAKEUP_STAT 	S5PC1XX_CLKREG(0x8304)
-#define S5PC100_BLK_PWR_STAT 	S5PC1XX_CLKREG(0x8308)
-#define S5PC100_INFORM0 		S5PC1XX_CLKREG(0x8400)
-#define S5PC100_INFORM1 		S5PC1XX_CLKREG(0x8404)
-#define S5PC100_INFORM2 		S5PC1XX_CLKREG(0x8408)
-#define S5PC100_INFORM3 		S5PC1XX_CLKREG(0x840C)
-#define S5PC100_INFORM4 		S5PC1XX_CLKREG(0x8410)
-#define S5PC100_INFORM5 		S5PC1XX_CLKREG(0x8414)
-#define S5PC100_INFORM6 		S5PC1XX_CLKREG(0x8418)
-#define S5PC100_INFORM7 		S5PC1XX_CLKREG(0x841C)
-#define S5PC100_DCGIDX_MAP0 	S5PC1XX_CLKREG(0x8500)
-#define S5PC100_DCGIDX_MAP1 	S5PC1XX_CLKREG(0x8504)
-#define S5PC100_DCGIDX_MAP2 	S5PC1XX_CLKREG(0x8508)
-#define S5PC100_DCGPERF_MAP0 	S5PC1XX_CLKREG(0x850C)
-#define S5PC100_DCGPERF_MAP1 	S5PC1XX_CLKREG(0x8510)
-#define S5PC100_DVCIDX_MAP 		S5PC1XX_CLKREG(0x8514)
-#define S5PC100_FREQ_CPU 		S5PC1XX_CLKREG(0x8518)
-#define S5PC100_FREQ_DPM 		S5PC1XX_CLKREG(0x851C)
-#define S5PC100_DVSEMCLK_EN 	S5PC1XX_CLKREG(0x8520)
-#define S5PC100_APLL_CON_L8 	S5PC1XX_CLKREG(0x8600)
-#define S5PC100_APLL_CON_L7 	S5PC1XX_CLKREG(0x8604)
-#define S5PC100_APLL_CON_L6 	S5PC1XX_CLKREG(0x8608)
-#define S5PC100_APLL_CON_L5 	S5PC1XX_CLKREG(0x860C)
-#define S5PC100_APLL_CON_L4 	S5PC1XX_CLKREG(0x8610)
-#define S5PC100_APLL_CON_L3 	S5PC1XX_CLKREG(0x8614)
-#define S5PC100_APLL_CON_L2 	S5PC1XX_CLKREG(0x8618)
-#define S5PC100_APLL_CON_L1 	S5PC1XX_CLKREG(0x861C)
-#define S5PC100_IEM_CONTROL 	S5PC1XX_CLKREG(0x8620)
-#define S5PC100_CLKDIV_IEM_L8 	S5PC1XX_CLKREG(0x8700)
-#define S5PC100_CLKDIV_IEM_L7 	S5PC1XX_CLKREG(0x8704)
-#define S5PC100_CLKDIV_IEM_L6 	S5PC1XX_CLKREG(0x8708)
-#define S5PC100_CLKDIV_IEM_L5 	S5PC1XX_CLKREG(0x870C)
-#define S5PC100_CLKDIV_IEM_L4 	S5PC1XX_CLKREG(0x8710)
-#define S5PC100_CLKDIV_IEM_L3 	S5PC1XX_CLKREG(0x8714)
-#define S5PC100_CLKDIV_IEM_L2 	S5PC1XX_CLKREG(0x8718)
-#define S5PC100_CLKDIV_IEM_L1 	S5PC1XX_CLKREG(0x871C)
-#define S5PC100_IEM_HPMCLK_DIV 	S5PC1XX_CLKREG(0x8724)
-
-#define S5PC100_SWRESET		S5PC1XX_CLKREG(0x100000)
-#define S5PC100_OND_SWRESET		S5PC1XX_CLKREG(0x100008)
-#define S5PC100_GEN_CTRL		S5PC1XX_CLKREG(0x100100)
-#define S5PC100_GEN_STATUS		S5PC1XX_CLKREG(0x100104)
-#define S5PC100_MEM_SYS_CFG		S5PC1XX_CLKREG(0x100200)
-#define S5PC100_CAM_MUX_SEL		S5PC1XX_CLKREG(0x100300)
-#define S5PC100_MIXER_OUT_SEL	S5PC1XX_CLKREG(0x100304)
-#define S5PC100_LPMP_MODE_SEL	S5PC1XX_CLKREG(0x100308)
-#define S5PC100_MIPI_PHY_CON0	S5PC1XX_CLKREG(0x100400)
-#define S5PC100_MIPI_PHY_CON1	S5PC1XX_CLKREG(0x100414)
-#define S5PC100_HDMI_PHY_CON0	S5PC1XX_CLKREG(0x100420)
-
-#define S5PC100_CFG_WFI_CLEAN	(~(3<<5))
-#define S5PC100_CFG_WFI_IDLE	(1<<5)
-#define S5PC100_CFG_WFI_STOP	(2<<5)
-#define S5PC100_CFG_WFI_SLEEP	(3<<5)
+#define S5PC100_SWRESET		S5PC100_CLKREG_OTHER(0x000)
+#define S5PC100_OND_SWRESET	S5PC100_CLKREG_OTHER(0x008)
+#define S5PC100_GEN_CTRL	S5PC100_CLKREG_OTHER(0x100)
+#define S5PC100_GEN_STATUS	S5PC100_CLKREG_OTHER(0x104)
+#define S5PC100_MEM_SYS_CFG	S5PC100_CLKREG_OTHER(0x200)
+#define S5PC100_CAM_MUX_SEL	S5PC100_CLKREG_OTHER(0x300)
+#define S5PC100_MIXER_OUT_SEL	S5PC100_CLKREG_OTHER(0x304)
+#define S5PC100_LPMP_MODE_SEL	S5PC100_CLKREG_OTHER(0x308)
+#define S5PC100_MIPI_PHY_CON0	S5PC100_CLKREG_OTHER(0x400)
+#define S5PC100_MIPI_PHY_CON1	S5PC100_CLKREG_OTHER(0x414)
+#define S5PC100_HDMI_PHY_CON0	S5PC100_CLKREG_OTHER(0x420)
 
+#define S5PC100_SWRESET_RESETVAL	0xc100
 #define S5PC100_OTHER_SYS_INT	24
 #define S5PC100_OTHER_STA_TYPE	23
 #define STA_TYPE_EXPON		0
 #define STA_TYPE_SFR		1
 
-#define S5PC100_PWR_STA_EXP_SCALE	0
-#define S5PC100_PWR_STA_CNT		4
-
-#define S5PC100_PWR_STABLE_COUNT	85500
-
 #define S5PC100_SLEEP_CFG_OSC_EN	0
 
 /* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK 	(1 << 16)
+#define S5PC100_OTHERS_USB_SIG_MASK	(1 << 16)
 #define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
 
 /* MIPI D-PHY Control Register 0 */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
new file mode 100644
index 000000000000..43c7bc8bf784
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
+#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE	S5PC1XX_VA_GPIO
+#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
+#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
+#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
+#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
+#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
+#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
+#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
+#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
+#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
+#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
+#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
+#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
+#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
+#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
+#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
+#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
+#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
+#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
+#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
+#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
+#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
+#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
+#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
+#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
+#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
+#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
+#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
+#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
+#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
+#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
+#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
+#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
+#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
+#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
+#define S5PC100_EINT_BASE	(S5PC100_GPIO_BASE + 0x0E00)
+
+#define S5PC100_UHOST		(S5PC100_GPIO_BASE + 0x0B68)
+#define S5PC100_PDNEN		(S5PC100_GPIO_BASE + 0x0F80)
+
+/* PDNEN */
+#define S5PC100_PDNEN_CFG_PDNEN	(1 << 1)
+#define S5PC100_PDNEN_CFG_AUTO	(0 << 1)
+#define S5PC100_PDNEN_POWERDOWN	(1 << 0)
+#define S5PC100_PDNEN_NORMAL	(0 << 0)
+
+/* Common part */
+/* External interrupt base is same at both s5pc100 and s5pc110 */
+#define S5PC1XX_EINT_BASE	(S5PC100_EINT_BASE)
+
+#define S5PC100_GPx_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S5PC100_GPx_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+#define S5PC100_GPx_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+
+#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
new file mode 100644
index 000000000000..02ffa491b53a
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
@@ -0,0 +1,84 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Jongse Won <jongse.won@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S5PC1XX_PWRREG(x)			(S5PC1XX_VA_PWR + (x))
+
+/* s5pc100 (0xE0108000) register for power management */
+#define S5PC100_PWR_CFG				S5PC1XX_PWRREG(0x0)
+#define S5PC100_EINT_WAKEUP_MASK		S5PC1XX_PWRREG(0x4)
+#define S5PC100_NORMAL_CFG			S5PC1XX_PWRREG(0x10)
+#define S5PC100_STOP_CFG			S5PC1XX_PWRREG(0x14)
+#define S5PC100_SLEEP_CFG			S5PC1XX_PWRREG(0x18)
+#define S5PC100_STOP_MEM_CFG			S5PC1XX_PWRREG(0x1C)
+#define S5PC100_OSC_FREQ			S5PC1XX_PWRREG(0x100)
+#define S5PC100_OSC_STABLE			S5PC1XX_PWRREG(0x104)
+#define S5PC100_PWR_STABLE			S5PC1XX_PWRREG(0x108)
+#define S5PC100_MTC_STABLE			S5PC1XX_PWRREG(0x110)
+#define S5PC100_CLAMP_STABLE			S5PC1XX_PWRREG(0x114)
+#define S5PC100_OTHERS				S5PC1XX_PWRREG(0x200)
+#define S5PC100_RST_STAT			S5PC1XX_PWRREG(0x300)
+#define S5PC100_WAKEUP_STAT			S5PC1XX_PWRREG(0x304)
+#define S5PC100_BLK_PWR_STAT			S5PC1XX_PWRREG(0x308)
+#define S5PC100_INFORM0				S5PC1XX_PWRREG(0x400)
+#define S5PC100_INFORM1				S5PC1XX_PWRREG(0x404)
+#define S5PC100_INFORM2				S5PC1XX_PWRREG(0x408)
+#define S5PC100_INFORM3				S5PC1XX_PWRREG(0x40C)
+#define S5PC100_INFORM4				S5PC1XX_PWRREG(0x410)
+#define S5PC100_INFORM5				S5PC1XX_PWRREG(0x414)
+#define S5PC100_INFORM6				S5PC1XX_PWRREG(0x418)
+#define S5PC100_INFORM7				S5PC1XX_PWRREG(0x41C)
+#define S5PC100_DCGIDX_MAP0			S5PC1XX_PWRREG(0x500)
+#define S5PC100_DCGIDX_MAP1			S5PC1XX_PWRREG(0x504)
+#define S5PC100_DCGIDX_MAP2			S5PC1XX_PWRREG(0x508)
+#define S5PC100_DCGPERF_MAP0			S5PC1XX_PWRREG(0x50C)
+#define S5PC100_DCGPERF_MAP1			S5PC1XX_PWRREG(0x510)
+#define S5PC100_DVCIDX_MAP			S5PC1XX_PWRREG(0x514)
+#define S5PC100_FREQ_CPU			S5PC1XX_PWRREG(0x518)
+#define S5PC100_FREQ_DPM			S5PC1XX_PWRREG(0x51C)
+#define S5PC100_DVSEMCLK_EN			S5PC1XX_PWRREG(0x520)
+#define S5PC100_APLL_CON_L8			S5PC1XX_PWRREG(0x600)
+#define S5PC100_APLL_CON_L7			S5PC1XX_PWRREG(0x604)
+#define S5PC100_APLL_CON_L6			S5PC1XX_PWRREG(0x608)
+#define S5PC100_APLL_CON_L5			S5PC1XX_PWRREG(0x60C)
+#define S5PC100_APLL_CON_L4			S5PC1XX_PWRREG(0x610)
+#define S5PC100_APLL_CON_L3			S5PC1XX_PWRREG(0x614)
+#define S5PC100_APLL_CON_L2			S5PC1XX_PWRREG(0x618)
+#define S5PC100_APLL_CON_L1			S5PC1XX_PWRREG(0x61C)
+#define S5PC100_IEM_CONTROL			S5PC1XX_PWRREG(0x620)
+#define S5PC100_CLKDIV_IEM_L8			S5PC1XX_PWRREG(0x700)
+#define S5PC100_CLKDIV_IEM_L7			S5PC1XX_PWRREG(0x704)
+#define S5PC100_CLKDIV_IEM_L6			S5PC1XX_PWRREG(0x708)
+#define S5PC100_CLKDIV_IEM_L5			S5PC1XX_PWRREG(0x70C)
+#define S5PC100_CLKDIV_IEM_L4			S5PC1XX_PWRREG(0x710)
+#define S5PC100_CLKDIV_IEM_L3			S5PC1XX_PWRREG(0x714)
+#define S5PC100_CLKDIV_IEM_L2			S5PC1XX_PWRREG(0x718)
+#define S5PC100_CLKDIV_IEM_L1			S5PC1XX_PWRREG(0x71C)
+#define S5PC100_IEM_HPMCLK_DIV			S5PC1XX_PWRREG(0x724)
+
+/* PWR_CFG */
+#define S5PC100_PWRCFG_CFG_DEEP_IDLE		(1 << 31)
+#define S5PC100_PWRCFG_CFG_WFI_MASK		(3 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_IDLE		(0 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE	(1 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_STOP		(2 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_SLEEP		(3 << 5)
+
+/* SLEEP_CFG */
+#define S5PC100_SLEEP_OSC_EN_SLEEP		(1 << 0)
+
+/* OTHERS */
+#define S5PC100_PMU_INT_DISABLE			(1 << 24)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
index 45e275131665..2531f34a56f3 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -35,10 +35,9 @@ extern struct clk clk_hpll;
 extern struct clk clk_hd0;
 extern struct clk clk_pd0;
 extern struct clk clk_54m;
-extern struct clk clk_dout_mpll2;
 extern void s5pc1xx_register_clocks(void);
-extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
 
 /* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
 extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
new file mode 100644
index 000000000000..373122f57d56
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-eint.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/plat-s5pc1xx/irq-eint.c
+ *
+ *  Copyright 2009 Samsung Electronics Co.
+ *  Byungho Min <bhmin@samsung.com>
+ *  Kyungin Park <kyungmin.park@samsung.com>
+ *
+ * Based on plat-s3c64xx/irq-eint.c
+ *
+ * S5PC1XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-ext.h>
+#include <plat/pm.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-irqtype.h>
+
+/*
+ * bank is a group of external interrupt
+ * bank0 means EINT0 ... EINT7
+ * bank1 means EINT8 ... EINT15
+ * bank2 means EINT16 ... EINT23
+ * bank3 means EINT24 ... EINT31
+ */
+
+static inline int s3c_get_eint(unsigned int irq)
+{
+	int real;
+
+	if (irq < IRQ_EINT16_31)
+		real = (irq - IRQ_EINT0);
+	else
+		real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
+
+	return real;
+}
+
+static inline int s3c_get_bank(unsigned int irq)
+{
+	return s3c_get_eint(irq) >> 3;
+}
+
+static inline int s3c_eint_to_bit(unsigned int irq)
+{
+	int real, bit;
+
+	real = s3c_get_eint(irq);
+	bit = 1 << (real & (8 - 1));
+
+	return bit;
+}
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+	u32 bank = s3c_get_bank(irq);
+
+	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+	mask |= s3c_eint_to_bit(irq);
+	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+	u32 bank = s3c_get_bank(irq);
+
+	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+	mask &= ~(s3c_eint_to_bit(irq));
+	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+	u32 bank = s3c_get_bank(irq);
+
+	__raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(irq);
+	s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	u32 bank = s3c_get_bank(irq);
+	int real = s3c_get_eint(irq);
+	int gpio, shift, sfn;
+	u32 ctrl, con = 0;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		con = S5PC1XX_WKUP_INT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		con = S5PC1XX_WKUP_INT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		con = S5PC1XX_WKUP_INT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		con = S5PC1XX_WKUP_INT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		con = S5PC1XX_WKUP_INT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	gpio = real & (8 - 1);
+	shift = gpio << 2;
+
+	ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
+	ctrl &= ~(0x7 << shift);
+	ctrl |= con << shift;
+	__raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
+
+	switch (real) {
+	case 0 ... 7:
+			gpio = S5PC100_GPH0(gpio);
+		break;
+	case 8 ... 15:
+			gpio = S5PC100_GPH1(gpio);
+		break;
+	case 16 ... 23:
+			gpio = S5PC100_GPH2(gpio);
+		break;
+	case 24 ... 31:
+			gpio = S5PC100_GPH3(gpio);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sfn = S3C_GPIO_SFN(0x2);
+	s3c_gpio_cfgpin(gpio, sfn);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "EINT",
+	.mask		= s3c_irq_eint_mask,
+	.unmask		= s3c_irq_eint_unmask,
+	.mask_ack	= s3c_irq_eint_maskack,
+	.ack		= s3c_irq_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from external interrupts,
+ * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
+	u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(16, 23);
+	s3c_irq_demux_eint(24, 31);
+}
+
+/*
+ * Handle EINT0 ... EINT15 at VIC directly
+ */
+static void s3c_irq_vic_eint_mask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	unsigned int real;
+
+	s3c_irq_eint_mask(irq);
+	real = s3c_get_eint(irq);
+	writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s3c_irq_vic_eint_unmask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	unsigned int real;
+
+	s3c_irq_eint_unmask(irq);
+	real = s3c_get_eint(irq);
+	writel(1 << real, base + VIC_INT_ENABLE);
+}
+
+static inline void s3c_irq_vic_eint_ack(unsigned int irq)
+{
+	u32 bit;
+	u32 bank = s3c_get_bank(irq);
+
+	bit = s3c_eint_to_bit(irq);
+	__raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_vic_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_vic_eint_mask(irq);
+	s3c_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s3c_irq_vic_eint = {
+	.name		= "EINT",
+	.mask		= s3c_irq_vic_eint_mask,
+	.unmask		= s3c_irq_vic_eint_unmask,
+	.mask_ack	= s3c_irq_vic_eint_maskack,
+	.ack		= s3c_irq_vic_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+static int __init s5pc1xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
+		set_irq_chip(irq, &s3c_irq_vic_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
+
+	return 0;
+}
+
+arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c
new file mode 100644
index 000000000000..fecca7a679b0
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/plat-s5pc1xx/irq-gpio.c
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ *
+ * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-cfg.h>
+
+#define S5PC1XX_GPIOREG(x)		(S5PC1XX_VA_GPIO + (x))
+
+#define CON_OFFSET			0x700
+#define MASK_OFFSET			0x900
+#define PEND_OFFSET			0xA00
+#define CON_OFFSET_2			0xE00
+#define MASK_OFFSET_2			0xF00
+#define PEND_OFFSET_2			0xF40
+
+#define GPIOINT_LEVEL_LOW		0x0
+#define GPIOINT_LEVEL_HIGH		0x1
+#define GPIOINT_EDGE_FALLING		0x2
+#define GPIOINT_EDGE_RISING		0x3
+#define GPIOINT_EDGE_BOTH		0x4
+
+static int group_to_con_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_mask_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_pend_offset(int group)
+{
+	return group << 2;
+}
+
+static int s5pc1xx_get_start(unsigned int group)
+{
+	switch (group) {
+	case 0: return S5PC100_GPIO_A0_START;
+	case 1: return S5PC100_GPIO_A1_START;
+	case 2: return S5PC100_GPIO_B_START;
+	case 3: return S5PC100_GPIO_C_START;
+	case 4: return S5PC100_GPIO_D_START;
+	case 5: return S5PC100_GPIO_E0_START;
+	case 6: return S5PC100_GPIO_E1_START;
+	case 7: return S5PC100_GPIO_F0_START;
+	case 8: return S5PC100_GPIO_F1_START;
+	case 9: return S5PC100_GPIO_F2_START;
+	case 10: return S5PC100_GPIO_F3_START;
+	case 11: return S5PC100_GPIO_G0_START;
+	case 12: return S5PC100_GPIO_G1_START;
+	case 13: return S5PC100_GPIO_G2_START;
+	case 14: return S5PC100_GPIO_G3_START;
+	case 15: return S5PC100_GPIO_I_START;
+	case 16: return S5PC100_GPIO_J0_START;
+	case 17: return S5PC100_GPIO_J1_START;
+	case 18: return S5PC100_GPIO_J2_START;
+	case 19: return S5PC100_GPIO_J3_START;
+	case 20: return S5PC100_GPIO_J4_START;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc1xx_get_group(unsigned int irq)
+{
+	irq -= S3C_IRQ_GPIO(0);
+
+	switch (irq) {
+	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
+		return 0;
+	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
+		return 1;
+	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
+		return 2;
+	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
+		return 3;
+	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
+		return 4;
+	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
+		return 5;
+	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
+		return 6;
+	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
+		return 7;
+	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
+		return 8;
+	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
+		return 9;
+	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
+		return 10;
+	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
+		return 11;
+	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
+		return 12;
+	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
+		return 13;
+	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
+		return 14;
+	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
+		return 15;
+	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
+		return 16;
+	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
+		return 17;
+	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
+		return 18;
+	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
+		return 19;
+	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
+		return 20;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc1xx_get_offset(unsigned int irq)
+{
+	struct gpio_chip *chip = get_irq_data(irq);
+	return irq - S3C_IRQ_GPIO(chip->base);
+}
+
+static void s5pc1xx_gpioint_ack(unsigned int irq)
+{
+	int group, offset, pend_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	pend_offset = group_to_pend_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+}
+
+static void s5pc1xx_gpioint_mask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_unmask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value &= ~(1 << offset);
+	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
+{
+	s5pc1xx_gpioint_mask(irq);
+	s5pc1xx_gpioint_ack(irq);
+}
+
+static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+	int group, offset, con_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	con_offset = group_to_con_offset(group);
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	case IRQ_TYPE_EDGE_RISING:
+		type = GPIOINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = GPIOINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = GPIOINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = GPIOINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = GPIOINT_LEVEL_LOW;
+		break;
+	default:
+		BUG();
+	}
+
+
+	value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+	value &= ~(0xf << (offset * 0x4));
+	value |= (type << (offset * 0x4));
+	__raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+
+	return 0;
+}
+
+struct irq_chip s5pc1xx_gpioint = {
+	.name		= "GPIO",
+	.ack		= s5pc1xx_gpioint_ack,
+	.mask		= s5pc1xx_gpioint_mask,
+	.mask_ack	= s5pc1xx_gpioint_mask_ack,
+	.unmask		= s5pc1xx_gpioint_unmask,
+	.set_type	= s5pc1xx_gpioint_set_type,
+};
+
+void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int group, offset, pend_offset, mask_offset;
+	int real_irq, group_end;
+	unsigned int pend, mask;
+
+	group_end = 21;
+
+	for (group = 0; group < group_end; group++) {
+		pend_offset = group_to_pend_offset(group);
+		pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = group_to_mask_offset(group);
+		mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+		pend &= ~mask;
+
+		for (offset = 0; offset < 8; offset++) {
+			if (pend & (1 << offset)) {
+				real_irq = s5pc1xx_get_start(group) + offset;
+				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
+			}
+		}
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index 80d6dd942cb8..e44fd04ef333 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -79,7 +79,7 @@ static void s3c_irq_timer_ack(unsigned int irq)
 {
 	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
 
-	reg &= 0x1f;
+	reg &= 0x1f;  /* mask out pending interrupts */
 	reg |= (1 << 5) << (irq - IRQ_TIMER0);
 	__raw_writel(reg, S3C64XX_TINT_CSTAT);
 }
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index 6b24035172fa..b436d44510c8 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -49,6 +49,7 @@ static struct clk clk_ext_xtal_mux = {
 #define clk_fin_hpll clk_ext_xtal_mux
 
 #define clk_fout_mpll	clk_mpll
+#define clk_vclk_54m	clk_54m
 
 struct clk_sources {
 	unsigned int	nr_sources;
@@ -67,723 +68,11 @@ struct clksrc_clk {
 	void __iomem		*reg_source;
 };
 
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 1;
-}
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5PC1XX_CLK_SRC1);
-	if (enable)
-		val |= S5PC100_CLKSRC1_CLK48M_MASK;
-	else
-		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
-	__raw_writel(val, S5PC1XX_CLK_SRC1);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
-	.name		= "clk_54m",
-	.id		= -1,
-	.rate		= 54000000,
-};
-
-struct clk clk_hpll = {
-	.name		= "hpll",
-	.id		= -1,
-};
-
-struct clk clk_hd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_pd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "dsi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
-	}, {
-		.name		= "csi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
-	}, {
-		.name		= "ccan0",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
-	}, {
-		.name		= "ccan1",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
-	}, {
-		.name		= "keypad",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "hclkd2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
-	}, {
-		.name		= "iis-d2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
-	}, {
-		.name		= "otg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
-	},
-};
-
-static struct clk init_clocks[] = {
-	/* System1 (D0_0) devices */
-	{
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
-	}, {
-		.name		= "tzic",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
-	}, {
-		.name		= "cf-ata",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
-	}, {
-		.name		= "mdma",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
-	}, {
-		.name		= "g2d",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
-	}, {
-		.name		= "secss",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
-	}, {
-		.name		= "cssys",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
-	},
-
-	/* Memory (D0_1) devices */
-	{
-		.name		= "dmc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
-	}, {
-		.name		= "sromc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
-	}, {
-		.name		= "onenand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
-	}, {
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
-	}, {
-		.name		= "intmem",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
-	}, {
-		.name		= "ebi",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
-	},
-
-	/* System2 (D0_2) devices */
-	{
-		.name		= "seckey",
-		.id		= -1,
-		.parent		= &clk_pd0,
-		.enable		= s5pc1xx_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
-	}, {
-		.name		= "sdm",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
-	},
-
-	/* File (D1_0) devices */
-	{
-		.name		= "pdma0",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
-	}, {
-		.name		= "pdma1",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
-	}, {
-		.name		= "modem",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
-	},
-
-	/* Multimedia1 (D1_1) devices */
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
-	}, {
-		.name		= "rotator",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
-	}, {
-		.name		= "fimc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
-	}, {
-		.name		= "fimc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
-	}, {
-		.name		= "fimc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
-	}, {
-		.name		= "jpeg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
-	}, {
-		.name		= "g3d",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
-	},
-
-	/* Multimedia2 (D1_2) devices */
-	{
-		.name		= "tv",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
-	}, {
-		.name		= "vp",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
-	}, {
-		.name		= "mixer",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
-	}, {
-		.name		= "hdmi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
-	}, {
-		.name		= "mfc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
-	},
-
-	/* System (D1_3) devices */
-	{
-		.name		= "chipid",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
-	}, {
-		.name		= "apc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
-	}, {
-		.name		= "iec",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
-	}, {
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
-	},
-
-	/* Connectivity (D1_4) devices */
-	{
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
-	}, {
-		.name		= "hdmi-i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
-	}, {
-		.name		= "spi",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
-	}, {
-		.name		= "irda",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
-	}, {
-		.name		= "hsitx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
-	}, {
-		.name		= "hsirx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
-	},
-
-	/* Audio (D1_5) devices */
-	{
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
-	}, {
-		.name		= "iis",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
-	}, {
-		.name		= "pcm",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
-	}, {
-		.name		= "pcm",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
-	}, {
-		.name		= "spdif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
-	}, {
-		.name		= "keyif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "cg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
-	},
-
-	/* Audio (D2_0) devices: all disabled */
-
-	/* Special Clocks 1 */
-	{
-		.name		= "sclk_hpm",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC1XX_CLKGATE_SCLK0_HPM,
-	}, {
-		.name		= "sclk_onenand",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
-	},
-
-	/* Special Clocks 2 */
-	{
-		.name		= "sclk_tv_54",
-		.id		= -1,
-		.parent		= &clk_54m,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_TV54,
-	}, {
-		.name		= "sclk_vdac_54",
-		.id		= -1,
-		.parent		= &clk_54m,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_VDAC54,
-	}, {
-		.name		= "sclk_spdif",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_SPDIF,
-	},
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
+/* APLL */
 static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
 	.id		= -1,
+	.rate		= 27000000,
 };
 
 static struct clk *clk_src_apll_list[] = {
@@ -801,12 +90,305 @@ static struct clksrc_clk clk_mout_apll = {
 		.name		= "mout_apll",
 		.id		= -1,
 	},
-	.shift		= S5PC1XX_CLKSRC0_APLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_APLL_MASK,
+	.shift		= S5PC100_CLKSRC0_APLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_APLL_MASK,
 	.sources	= &clk_src_apll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
+static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
+	ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_apll = {
+	.name		= "dout_apll",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s5pc100_clk_dout_apll_get_rate,
+};
+
+static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
+	ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return rate;
+
+	div = (parent / rate) - 1;
+	if (div > S5PC100_CLKDIV0_ARM_MASK)
+		div = S5PC100_CLKDIV0_ARM_MASK;
+
+	return parent / (div + 1);
+}
+
+static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S5PC100_CLKDIV0);
+	val &= S5PC100_CLKDIV0_ARM_MASK;
+	val |= (div - 1);
+	__raw_writel(val, S5PC100_CLKDIV0);
+
+	return 0;
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_dout_apll,
+	.get_rate	= s5pc100_clk_arm_get_rate,
+	.set_rate	= s5pc100_clk_arm_set_rate,
+	.round_rate	= s5pc100_clk_arm_round_rate,
+};
+
+static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
+	ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_d0_bus = {
+	.name		= "dout_d0_bus",
+	.id		= -1,
+	.parent		= &clk_arm,
+	.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
+	ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_pclkd0 = {
+	.name		= "dout_pclkd0",
+	.id		= -1,
+	.parent		= &clk_dout_d0_bus,
+	.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
+	ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_apll2 = {
+	.name		= "dout_apll2",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s5pc100_clk_dout_apll2_get_rate,
+};
+
+/* MPLL */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_MPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_MPLL_MASK,
+	.sources	= &clk_src_mpll,
+	.reg_source	= S5PC100_CLKSRC0,
+};
+
+static struct clk *clkset_am_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_dout_apll2,
+};
+
+static struct clk_sources clk_src_am = {
+	.sources	= clkset_am_list,
+	.nr_sources	= ARRAY_SIZE(clkset_am_list),
+};
+
+static struct clksrc_clk clk_mout_am = {
+	.clk = {
+		.name		= "mout_am",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_AMMUX_SHIFT,
+	.mask		= S5PC100_CLKSRC0_AMMUX_MASK,
+	.sources	= &clk_src_am,
+	.reg_source	= S5PC100_CLKSRC0,
+};
+
+static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
+	ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_d1_bus = {
+	.name		= "dout_d1_bus",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
+};
+
+static struct clk *clkset_onenand_list[] = {
+	[0] = &clk_dout_d0_bus,
+	[1] = &clk_dout_d1_bus,
+};
+
+static struct clk_sources clk_src_onenand = {
+	.sources	= clkset_onenand_list,
+	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+	.clk = {
+		.name		= "mout_onenand",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_ONENAND_SHIFT,
+	.mask		= S5PC100_CLKSRC0_ONENAND_MASK,
+	.sources	= &clk_src_onenand,
+	.reg_source	= S5PC100_CLKSRC0,
+};
+
+static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
+	ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_pclkd1 = {
+	.name		= "dout_pclkd1",
+	.id		= -1,
+	.parent		= &clk_dout_d1_bus,
+	.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+	ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll2 = {
+	.name		= "dout_mpll2",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
+	ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_cam = {
+	.name		= "dout_cam",
+	.id		= -1,
+	.parent		= &clk_dout_mpll2,
+	.get_rate	= s5pc100_clk_dout_cam_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+	ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_mpll_get_rate,
+};
+
+/* EPLL */
 static struct clk clk_fout_epll = {
 	.name		= "fout_epll",
 	.id		= -1,
@@ -827,91 +409,57 @@ static struct clksrc_clk clk_mout_epll = {
 		.name		= "mout_epll",
 		.id		= -1,
 	},
-	.shift		= S5PC1XX_CLKSRC0_EPLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_EPLL_MASK,
+	.shift		= S5PC100_CLKSRC0_EPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_EPLL_MASK,
 	.sources	= &clk_src_epll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
+/* HPLL */
+static struct clk clk_fout_hpll = {
+	.name		= "fout_hpll",
+	.id		= -1,
 };
 
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+static struct clk *clk_src_hpll_list[] = {
+	[0] = &clk_27m,
+	[1] = &clk_fout_hpll,
 };
 
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
+static struct clk_sources clk_src_hpll = {
+	.sources	= clk_src_hpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
+};
+
+static struct clksrc_clk clk_mout_hpll = {
+	.clk	= {
+		.name		= "mout_hpll",
 		.id		= -1,
 	},
-	.shift		= S5PC1XX_CLKSRC0_MPLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_MPLL_MASK,
-	.sources	= &clk_src_mpll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+	.shift		= S5PC100_CLKSRC0_HPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_HPLL_MASK,
+	.sources	= &clk_src_hpll,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
-static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
-	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
-
-	return rate;
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s5pc1xx_clk_doutmpll_get_rate,
-};
-
-static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
-	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
-
-	return rate;
-}
-
-struct clk clk_dout_mpll2 = {
-	.name		= "dout_mpll2",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s5pc1xx_clk_doutmpll2_get_rate,
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
+/* Peripherals */
+/*
+ * The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S5PC100 version, and also
+ * have a common parent divisor so are not included here.
+ */
 
 static inline struct clksrc_clk *to_clksrc(struct clk *clk)
 {
 	return container_of(clk, struct clksrc_clk, clk);
 }
 
-static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -925,7 +473,7 @@ static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
 	return rate;
 }
 
-static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	void __iomem *reg = sclk->reg_divider;
@@ -938,14 +486,14 @@ static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->shift);
-	val |= (div - 1) << sclk->shift;
+	val &= ~(0xf << sclk->divider_shift);
+	val |= (div - 1) << sclk->divider_shift;
 	__raw_writel(val, reg);
 
 	return 0;
 }
 
-static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	struct clk_sources *srcs = sclk->sources;
@@ -970,7 +518,7 @@ static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
 	return -EINVAL;
 }
 
-static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
 					      unsigned long rate)
 {
 	unsigned long parent_rate = clk_get_rate(clk->parent);
@@ -992,35 +540,466 @@ static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
 	return rate;
 }
 
+static struct clk *clkset_spi_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll2,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_spi = {
+	.sources	= clkset_spi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clksrc_clk clk_spi0 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI0_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI0_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi1 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI1_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI1_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi2 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI2_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI2_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
 static struct clksrc_clk clk_uart_uclk1 = {
 	.clk	= {
 		.name		= "uclk1",
 		.id		= -1,
 		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.set_parent	= s5pc1xx_setparent_clksrc,
-		.get_rate	= s5pc1xx_getrate_clksrc,
-		.set_rate	= s5pc1xx_setrate_clksrc,
-		.round_rate	= s5pc1xx_roundrate_clksrc,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
 	},
 	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
 	.mask		= S5PC100_CLKSRC1_UART_MASK,
 	.sources	= &clkset_uart,
 	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S5PC1XX_CLK_DIV2,
-	.reg_source	= S5PC1XX_CLK_SRC1,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd2 = {
+	.name		= "iis_cdclk2",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd0 = {
+	.name		= "pcm_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd1 = {
+	.name		= "pcm_cdclk1",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd0,
+	&clk_pcm_cd0,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clksrc_clk clk_audio0 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO0_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO0_MASK,
+	.sources	= &clkset_audio0,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd1,
+	&clk_pcm_cd1,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clksrc_clk clk_audio1 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO1_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO1_MASK,
+	.sources	= &clkset_audio1,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio2_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd2,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio2 = {
+	.sources	= clkset_audio2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
+};
+
+static struct clksrc_clk clk_audio2 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO2_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO2_MASK,
+	.sources	= &clkset_audio2,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_spdif_list[] = {
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_audio2.clk,
+};
+
+static struct clk_sources clkset_spdif = {
+	.sources	= clkset_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
+};
+
+static struct clksrc_clk clk_spdif = {
+	.clk	= {
+		.name		= "spdif",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC3_SPDIF_SHIFT,
+	.mask		= S5PC100_CLKSRC3_SPDIF_MASK,
+	.sources	= &clkset_spdif,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_lcd_fimc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_mout_hpll.clk,
+	&clk_vclk_54m,
+};
+
+static struct clk_sources clkset_lcd_fimc = {
+	.sources	= clkset_lcd_fimc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
+};
+
+static struct clksrc_clk clk_lcd = {
+	.clk	= {
+		.name		= "lcd",
+		.id		= -1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_LCD_SHIFT,
+	.mask		= S5PC100_CLKSRC2_LCD_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_LCD_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc0 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC0_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC0_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc1 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC1_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC1_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc2 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC2_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC2_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clk *clkset_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk ,
+};
+
+static struct clk_sources clkset_mmc = {
+	.sources	= clkset_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
+};
+
+static struct clksrc_clk clk_mmc0 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC0_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC0_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc1 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC1_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC1_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc2 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC2_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC2_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+
+static struct clk *clkset_usbhost_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_mout_hpll.clk,
+	&clk_48m,
+};
+
+static struct clk_sources clkset_usbhost = {
+	.sources	= clkset_usbhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
+};
+
+static struct clksrc_clk clk_usbhost = {
+	.clk	= {
+		.name		= "usbhost",
+		.id		= -1,
+		.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_UHOST_SHIFT,
+	.mask		= S5PC100_CLKSRC1_UHOST_MASK,
+	.sources	= &clkset_usbhost,
+	.divider_shift	= S5PC100_CLKDIV2_UHOST_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
 };
 
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
 	&clk_mout_apll,
-	&clk_mout_epll,
 	&clk_mout_mpll,
+	&clk_mout_am,
+	&clk_mout_onenand,
+	&clk_mout_epll,
+	&clk_mout_hpll,
+	&clk_spi0,
+	&clk_spi1,
+	&clk_spi2,
 	&clk_uart_uclk1,
+	&clk_audio0,
+	&clk_audio1,
+	&clk_audio2,
+	&clk_spdif,
+	&clk_lcd,
+	&clk_fimc0,
+	&clk_fimc1,
+	&clk_fimc2,
+	&clk_mmc0,
+	&clk_mmc1,
+	&clk_mmc2,
+	&clk_usbhost,
 };
 
-static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
 {
 	struct clk_sources *srcs = clk->sources;
 	u32 clksrc = __raw_readl(clk->reg_source);
@@ -1036,9 +1015,9 @@ static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
 
 	clk->clk.parent = srcs->sources[clksrc];
 
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-	       clk->clk.name, clk->clk.parent->name, clksrc,
-	       clk_get_rate(&clk->clk));
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
+		clk->clk.name, clk->clk.parent->name, clksrc,
+		print_mhz(clk_get_rate(&clk->clk)));
 }
 
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
@@ -1052,20 +1031,16 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 	unsigned long hclk;
 	unsigned long pclkd0;
 	unsigned long pclk;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long hpll;
-	unsigned long epll;
+	unsigned long apll, mpll, epll, hpll;
 	unsigned int ptr;
 	u32 clkdiv0, clkdiv1;
 
 	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
 
-	clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
-	clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+	clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
+	clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
 
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
-			__func__, clkdiv0, clkdiv1);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
 
 	xtal_clk = clk_get(NULL, "xtal");
 	BUG_ON(IS_ERR(xtal_clk));
@@ -1075,48 +1050,81 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
-	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
-	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
-	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
+	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
+	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
 	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
 
-	printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
-	       apll, mpll, epll, hpll);
+	printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
+		", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
+		print_mhz(apll), print_mhz(mpll),
+		print_mhz(epll), print_mhz(hpll));
 
-	armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+	armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
 	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
 	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
 	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
 	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
 	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
 
-	printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
-	       armclk, hclkd0, pclkd0, hclk, pclk);
+	printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
+		" PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
+		" PCLK=%ld.%03ld MHz\n",
+		print_mhz(armclk), print_mhz(hclkd0),
+		print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
 
 	clk_fout_apll.rate = apll;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
+	clk_fout_hpll.rate = hpll;
 
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
+	clk_f.rate = armclk;
 
 	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s5pc1xx_set_clksrc(init_parents[ptr]);
+		s5pc100_set_clksrc(init_parents[ptr]);
 }
 
 static struct clk *clks[] __initdata = {
 	&clk_ext_xtal_mux,
+	&clk_mout_apll.clk,
+	&clk_dout_apll,
+	&clk_dout_d0_bus,
+	&clk_dout_pclkd0,
+	&clk_dout_apll2,
+	&clk_mout_mpll.clk,
+	&clk_mout_am.clk,
+	&clk_dout_d1_bus,
+	&clk_mout_onenand.clk,
+	&clk_dout_pclkd1,
+	&clk_dout_mpll2,
+	&clk_dout_cam,
+	&clk_dout_mpll,
 	&clk_mout_epll.clk,
 	&clk_fout_epll,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_iis_cd2,
+	&clk_pcm_cd0,
+	&clk_pcm_cd1,
+	&clk_spi0.clk,
+	&clk_spi1.clk,
+	&clk_spi2.clk,
 	&clk_uart_uclk1.clk,
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_54m,
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_audio2.clk,
+	&clk_spdif.clk,
+	&clk_lcd.clk,
+	&clk_fimc0.clk,
+	&clk_fimc1.clk,
+	&clk_fimc2.clk,
+	&clk_mmc0.clk,
+	&clk_mmc1.clk,
+	&clk_mmc2.clk,
+	&clk_usbhost.clk,
+	&clk_arm,
 };
 
 void __init s5pc100_register_clocks(void)
@@ -1133,7 +1141,4 @@ void __init s5pc100_register_clocks(void)
 			       clkp->name, ret);
 		}
 	}
-
-	clk_mpll.parent = &clk_mout_mpll.clk;
-	clk_epll.parent = &clk_mout_epll.clk;
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
new file mode 100644
index 000000000000..1a63768a9a2e
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC1XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+#define DISR_OFFSET	0x7008
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
index 3d00c025fffb..5e4a7c3a231e 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
index c8f3ca42f51d..a0a8b4ae6ad8 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
new file mode 100644
index 000000000000..185c8941e644
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+	unsigned int num;
+
+	num = width;
+	/* In case of 8 width, we should decrease the 2 */
+	if (width == 8)
+		num = width - 2;
+
+	end = S5PC100_GPG0(2 + num);
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	if (width == 8) {
+		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG2(2 + width);
+
+	/* Set all the necessary GPG2 pins to special-function 2 */
+	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG3(2 + width);
+
+	/* Set all the necessary GPG3 pins to special-function 2 */
+	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
new file mode 100644
index 000000000000..486a0d6301e7
--- /dev/null
+++ b/arch/arm/plat-samsung/Kconfig
@@ -0,0 +1,17 @@
+# arch/arm/plat-samsung/Kconfig
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_SAMSUNG
+	bool
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	default y
+	help
+	  Base platform code for all Samsung SoC based systems
+
+if PLAT_SAMSUNG
+
+
+endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
new file mode 100644
index 000000000000..4478b9f7dc34
--- /dev/null
+++ b/arch/arm/plat-samsung/Makefile
@@ -0,0 +1,11 @@
+# arch/arm/plat-s3c64xx/Makefile
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c99f0821cae3..73f089d3efd6 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2410 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 6e057d8809d3..ce75e28e36ef 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 69ff5d340f04..094cc3904b13 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 26c49e18bdd1..fad6083ca427 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -6,7 +6,7 @@
  *
  * Author: Sandeep Patil <sandeep.patil@azingo.com>
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1523e8d9ae77..52e3df113ec0 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -2,7 +2,7 @@
  *
  * Driver core for Samsung SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index d3fe315969f6..1fb22343df42 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify